proware_product_banner01

Simbolo Series SB-2124-G1A3

2U/12 bays, iSCSI-SATA II RAID Subsystem

Simbolo Series SB-2124-G1A3

2U/12 bays, iSCSI-SATA II RAID Subsystem
  • proware-2u12bays-storage-front
  • proware-2u12bays-storage-leftsidebar
  • proware-2u12bays-storage-rear

Features

  • Front-end 2 x 1Gb ports support independent access, fail-over or load-balancing (802.3ad port trunking, LACP)
  • Supports iSCSI jumbo frame
  • Supports Microsoft Multipath I/O (MPIO)
  • Local N-way mirror: Extension to RAID 1 level, N copies of the disk
  • Global and dedicated hot spare disks
  • Write-through or write-back cache policy for different application usage
  • Dedicated or shared cache allocation for volume usage
  • Supports greater than 2TB per volume set (64-bit LBA support)
  • Supports manual or scheduling volume snapshot (up to 32 snapshot)
  • Snapshot rollback mechanism
  • On-line volume migration with no system down-time
  • Online volume expansion
  • Instant RAID volume availability and background initialization
  • Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
  • Unparalleled Performance
  • Front-end 2 x 1Gb iSCSI
  • Supports 802.3ad port trunking, Link Aggregation Control Protocol (LACP)
  • High data bandwidth of system architecture by powerful 64-bit RAID processor
  • Unsurpassed Data Availability
  • RAID 6 capability provides the highest level of data protection
  • Supports snapshot-on-the-box w/o relying on host software
  • Exceptional Manageability Menu-driven front panel display
  • Management GUI via serial console, SSH telnet and Web
  • Event notification via Email and SNMP trap
  • Menu-driven front panel display
  • Model SB-2124-G1A3
    Form-factor 2U 19-inch rackmount chassis
    RAID processor Intel IOP341 64-bit
    RAID level 0, 1, 0+1, 3, 5, 6, 10, 30, 50, 60 and JBOD
      N-way mirror (N copies of the disk)
    Cache memory 512MB ~ 2GB DDR II
    No. of channels (host+drive) 2 + 12
    Host bus interface 1Gb/s Ethernet
    Drive bus interface 3Gb/s SATA II
    Hot-swap drive trays Twelve (12) 1-inch trays
    Host access control Read-Write & Read-Only
    Maximum logical volume up to 255
    Maximum host connection up to 32
    Maximum host clustering up to 16 for one logical volume
    Manual/scheduling volume snapshot up to 32
    Supports CHAP authentication Yes
    802.3ad port trunking, LACP support Yes
    Jumbo frame support Yes
    Snapshot rollback mechanism support Yes
    Supports Microsoft Multipath I/O (MPIO) Yes
    Global/dedicated cache configurable by volume Yes
    Global and dedicated hot spare disks Yes
    Online Volume migration Yes
    Online Volume sets expansion Yes
    Configurable stripe size Yes
    Instant RAID volume availability and background initialization support Yes
    Supports over 2TB per volume Yes
    Online consistency check Yes
    Bad block auto-remapping Yes
    S.M.A.R.T. support Yes
    New disk insertion / removal detection Yes
    Auto volume rebuild Yes
    Array roaming Yes
    Audible alarm Yes
    Password protection Yes
    UPS connection Yes
    Hot-swap power supplies Two (2) 350W power supplies w/PFC
    Cooling fans 2
    Battery backup Option
    Power requirements AC 90V ~ 264V Full Range, 8A ~ 4A, 47Hz ~ 63Hz
    Environmental  
    Relative Humidity 10% ~ 85% Non-condensing
    Operating Temp 10°C ~ 40°C (50°F ~ 104°F)
    Physical Dimension 88(H) x 482(W) x 650(D)mm
    Weight (Without Disk) 13.5 kgs
    For iSCSI firmware, please contact your account manager !!
    sb-2124_g1a3.pdf sb-2124-g1a3_v1.2.pdf
    Datasheet Manual
    [459KB] [5.45MB]
    Award & MediaReview content