EPICa Series EP-2243S/D-S3S3

2U SAS-SAS/SATAII RedundantRAID Subsystem

EPICa Series EP-2243S/D-S3S3

2U SAS-SAS/SATAII RedundantRAID Subsystem
  • proware-2u24bays-storage-front
  • proware-2u24bays-storage-leftsidebar
  • proware-2u24bays-d-storage-rear
  • proware-2u24bays-s-storage-rear


  • Fully redundant with hot swappable Controller, disks, cooling fans and power supplies
  • Modular Design With Common Parts
  • Supports RAID levels 0, 1, 0+1, 3, 5, 6, 30, 50, 60 and JBOD
  • Supports online Array roaming
  • Online RAID level/stripe size migration
  • Online capacity expansion and RAID level migration simultaneously
  • Online Volume Set Expansion
  • Supports multiple array enclosures per host connection
  • Supports greater than 2TB per volume set (64-bit LBA support)
  • Supports 4K bytes/sector for Windows up to 16TB per volume set
  • Support spin down drives when not in use to extend service (MAID 2.0)
  • Supports up to 128 LUNs per RAID set
  • Transparent data protection for all popular operating systems
  • RAID ADG provides the highest level of data protection
  • Instant availability and background initialization
  • Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
  • Supports hot spare and automatic hot rebuild
  • Local audible event notification alarm
  • Supports password protection
  • Built-in serial port interface for remote event notification
  • Highest Density Available
  • 2U chassis with 24 bays carriers
  • Support the latest 2.5”enterprise class SAS/SATA disk drives
  • Unsurpassed Data Availability
  • RAID 6 capability provides the highest level of data protection
  • Expansion capability up to 4 enclosures – total of 96 drives
  • Unparalleled Energy Saving
  • Low power consumption & Low heat production
  • MAID 2.0 20%~60% power savings
  • Exceptional Manageability
  • The firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration
  • The firmware-embedded SMTP manager monitors all system events and user notification automatically
  • The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
  • Menu-driven front panel display
  • Innovative Modular architecture
  • Model EP-2243S/D-S3S3
    Form - factor 2U 19-inch rackmount chassis
    RAID processor Intel IOP341 64-bit
    RAID level 0, 1, 0+1, 3, 5, 6, 30, 50, 60 and JBOD
    Cache memory 512MB ~ 4GB DDR-II SDRAM / 1GB ~ 8GB DDR-II SDRAM
    Host bus interface Two 4x mini SAS (SFF-8088) / Four 4x mini SAS (SFF-8088)
    Drive bus interface SAS or 3Gb/s SATA II
    Data transfer rate Up to 300MB/sec per channel
    Expansion One 4x mini SAS (SFF-8088) / Two 4x mini SAS (SFF-8088)
    Controller Redundancy Option / Yes
    Hot-swap drive trays Twenty four (24) 2.5” Small Form Factor(SFF) trays
    Total Disks Supported 96
    Max Number of chassis 4 (1 RAID and 3 JBOD)
    Online capacity expansion, RAID level/stripe size migration Yes
    Online Volume sets expansion Yes
    Online Array roaming Yes
    Online consistency check Yes
    SMTP manager and SNMP agent Yes
    E-mail Notification Yes
    Redundant Flash image Yes
    R-Link support Yes (RJ-45)
    Support over 2TB per volume Yes
    Instant availability and background initialization Yes
    S.M.A.R.T. support Yes
    New disk insertion / removal detection Yes
    Failed drive auto rebuild Yes
    Continuous rebuild Yes
    Multiple RAID selection Yes
    Bad block auto-remapping Yes
    Audio alarm Yes
    Password protection Yes
    Monitor port Yes(RS-232, RJ-11)
    SES2 enclosure management Yes
    Hot-swap power supplies Two(2) 400W power supplies w/PFC
    Cooling fans 2
    Battery backup Option
    Power requirements AC 90V ~ 264V full range 8A ~ 4A, 47Hz ~ 63Hz
    Relative Humidity: 10% ~ 85% Non-condensing
    Operating Temp: 10°C ~ 40°C (50°F ~ 104°F)
    Physical Dimensions: 88(H)x483(W)x559(D)mm
    Weight(without drives) 14kg / 15kg
    ep-2243sd_s3s3_f4s3_f8s3.pdf /ep-2243sd-s3s3_v1.2.pdf
    Datasheet Manual
    [312KB] [11.6MB]
    Award & MediaReview content