Simbolo Series SB-3164E-G1S3

3U/16 bays, iSCSI-SAS/SATA RAID Subsystem

Simbolo Series SB-3164E-G1S3

3U/16 bays, iSCSI-SAS/SATA RAID Subsystem
  • proware-3u16bays-storage-front
  • proware-3u16bays-storage-leftsidebar
  • proware-3u16bays-storage-frontopen
  • proware-3u16bays-storage-rear


  • Front-end 4 x 1Gb ports support independent access, fail-over or load-balancing (802.3ad port trunking, LACP)
  • Supports iSCSI jumbo frame
  • Supports Microsoft Multipath I/O (MPIO)
  • Local N-way mirror: Extension to RAID 1 level, N copies of the disk
  • Global and dedicated hot spare disks
  • Write-through or write-back cache policy for different application usage
  • Supports greater than 2TB per volume set (64-bit LBA support)
  • Supports manual or scheduling volume snapshot (up to 32 snapshot)
  • On-line volume migration with no system down-time
  • Online volume expansion
  • Instant RAID volume availability and background initialization
  • Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
  • Your message has been sent. Thank you!
    * Please fill all required form field, thanks!
    Unparalleled Performance
  • Front-end 4 x 1Gb iSCSI
  • Supports 802.3ad port trunking, Link Aggregation Control Protocol (LACP)
  • High data bandwidth of system architecture by powerful 64-bit RAID processor
  • Unsurpassed Data Availability
  • RAID 6 capability provides the highest level of data protection
  • Supports snapshot-on-the-box w/o relying on host software
  • Supports Microsoft Windows Volume Shadow Copy Services (VSS)
  • Exceptional Manageability Menu-driven front panel display
  • Management GUI via serial console, SSH telnet, Web and secure web(HTTPS)
  • Event notification via Email and SNMP trap
  • Menu-driven front panel display
  • Model SB-3164E-G1S3
    Form-factor 3U 19-inch rackmount chassis
    RAID processor Intel IOP342 64-bit (Chevelon dual core)
    RAID level 0, 1, 0+1, 3, 5, 6, 10 , 30, 50, 60 and JBOD
      N-way mirror (N copies of the disk)
    Cache memory 1GB ~2GB DDR II
    No. of channels (host+drive) 4 + 16
    Host bus interface 1Gb/s Ethernet
    Drive bus interface 3Gb/s SAS / SATA II
    Hot-swap drive trays Sixteen (16) 1-inch trays
    Host access control Read-Write & Read-Only
    Maximum logical volume up to 1024
    Maximum host connection up to 32
    Maximum host clustering up to 16 for one logical volume
    Manual/scheduling volume snapshot up to 32
    Supports CHAP authentication Yes
    802.3ad port trunking, LACP support Yes
    Jumbo frame support Yes
    Snapshot rollback mechanism support Yes
    Supports Microsoft Multipath I/O (MPIO) Yes
    Supports Microsoft Windows Volume Shadow Copy Service(VSS) Yes
    Global/dedicated cache configurable by volume Yes
    Global and dedicated hot spare disks Yes
    Online Volume migration Yes
    Online Volume sets expansion Yes
    Configurable RAID stripe size Yes
    Instant RAID volume availability and background initialization support Yes
    Supports over 2TB per volume Yes
    Online consistency check Yes
    Bad block auto-remapping Yes
    S.M.A.R.T. support Yes
    New disk insertion / removal detection Yes
    Auto volume rebuild Yes
    Array roaming Yes
    Audible alarm Yes
    Password protection Yes
    UPS connection Yes
    Hot-swap power supplies Two(2) 460W power supplies w/PFC
    Cooling fans 4
    Battery backup Option
    Power requirements AC 90V ~ 264V Full Range, 8A ~ 4A, 47Hz ~ 63Hz
    Relative Humidity 10% ~ 85% Non-condensing
    Operating Temp 10°C ~ 40°C (50°F ~ 104°F)
    Physical Dimension 133(H) x 482(W) x 600(D)mm ; 5.24(H) x 18.98(W) x 23.62(D)inches
    Weight (Without Disk) 24.7kgs / 54.34Lbs
    For iSCSI firmware,please contact your account manager !!
    sb-3164e_g1s3.pdf sb-3164e-g1s3_v1.2.pdf
    Datasheet Manual
    [309KB] [2.96MB]
    Award & MediaReview content