Simbolo Series SB-3163E1-F4A3

3U 16 Bays, 4Gb FC-SATAII RAID Subsystem

Simbolo Series SB-3163E1-F4A3

3U 16 Bays, 4Gb FC-SATAII RAID Subsystem
  • proware-3u16bays-storage-front
  • proware-3u16bays-storage-leftsidebar
  • proware-3u16bays-storage-frontopen
  • proware-3u16bays-storage-rear


  • Supports RAID levels 0, 1, 10(1E), 3, 5, 6, 30, 50, 60 and JBOD
  • Supports online Array roaming
  • Online RAID level/stripe size migration
  • Online capacity expansion and RAID level migration simultaneously
  • Online Volume Set Expansion
  • Supports multiple array enclosures per host connection
  • Supports greater than 2TB per volume set
  • Transparent data protection for all popular operating systems
  • RAID ADG provides the highest level of data protection
  • Instant availability and background initialization
  • Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
  • Local audible event notification alarm
  • Supports password protection
  • Serial port interface for remote event notification
  • Redundant flash image for high availability
  • Support spin down drives when not in use to extend service (MAID)
  • Supports Bad Blocks auto remapping and schedule volume check
  • Supports hot spare and automatic hot rebuild
  • Highest Density Available
  • 3U chassis with 16 bays carriers
  • Extraordinary Fault Tolerance
  • Advanced Data Guarding technology (RAID ADG) provides the highest level of data protection
  • RAID ADG can tolerate multiple simultaneous drive failures w ithout downtime or data loss
  • Exceptional Manageability
  • The firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration
  • The firmware-embedded SMTP manager monitors all system events and user notification automatically
  • The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
  • Menu-driven front panel display
  • RAID Management
  • Smart-function LCD panel
  • Environmental monitoring unit
  • Real time drive activity and status indicators
  • Browser-based GUI management utility
  • Model SB-3163E1-F4A3
    Form-factor 3U 19-inch rackmount chassis
    RAID processor Intel IOP348 64 bit RISC
    RAID level 0, 1, 10(1E), 3, 5, 6, 30, 50, 60, JBOD
    Cache memory 512MB ~ 4GB DDRII ECC SDRAM
    No. of channels (host+drive) 2 + 16
    Host bus interface FC-AL x 2 (4Gb/s)
    Drive bus interface SATA II
    Hot-swap drive trays Sixteen (16) 1-inch trays
    Hot-swappable power supplies Three (3) 300W power supplies w / PFC
    Cooling fans 2 (blower)
    Battery backup Option
    Drive Roaming Yes
    Online Rebuild Yes
    Online consistency check Yes
    SMTP manager and SNMP agent Yes
    Redundant Flash image Yes
    Instant availability and background initialization Yes
    R-Link support Yes
    SNMP Protocol Support Yes
    S.M.A.R.T Yes
    Online Array roaming Yes
    MAID Yes
    Bad block auto-remapping Yes
    Power requirements AC 90V ~ 254V Full Range 12A / 6A at 110V / 220V, 50Hz/60Hz
    Relative Humidity 10% ~ 85% Non-condensing
    Operating Temp 10°C ~ 40°C (50°F ~ 104°F)
    Physical Dimensions 133(H) x 482(W) x 609(D) mm
    Weight (Without Disk) 20.5kgs / 45.1Lbs
    *New disk auto spare *Host independent *Environment monitor *Online expansion *Continuous rebuild *Online consistency check *Failed drive auto rebuild *Failed drive indicators *Audible alarm *Password protection *UPS connection *Bad block auto-remapping *Multiple RAID selection *Online RAID level migration *E-mail Notification
    * Specification are subject to change without notice. All company and product names are trademarks of their respective owners.
    For FC(Fibre) firmware, please contact your account manager !!
    sb-3163e1-f4a3.pdf SB-3163E1-F4A3_v1.0.pdf
    Datasheet Manual
    [276KB] [3.34MB]
    Award & MediaReview content