PROWARE-By UNIFOSA-RAID,NAS,iSCSI and JBOD Srorage Provider

Features

60 hot-swappable disk drive bays which support SAS/SATA disks

Supports iSCSI jumbo frame

Supports Microsoft Multipath I/O (MPIO)

Supports RAID levels 0, 1, 0+1, 3, 5, 6, 10, 30, 50, 60 and JBOD

Local N-way mirror: Extension to RAID 1 level, N copies of the disk

Global and dedicated hot spare disks

Write-through or write-back cache policy for different application usage

Supports greater than 2TB per volume set (64-bit LBA support)

Supports manual or scheduling volume snapshot (up to 32 snapshot)

Snapshot rollback mechanism

On-line volume migration with no system down-time

Online volume expansion

Instant RAID volume availability and background initialization

Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives

High efficiency power supply which compliant with 80plus

Overview

The EP-4604D series RAID subsystem features high density disks capacity with 1/10 Gigabit ports on each controller to increase system efficiency and performance. It features high capability of expansion, with 60 hot-swappable SAS/SATA hard disk drive bays in a 19-inch 4U rackmount unit, scaling to a maximum storage capacity in the terabyte range. The EP-4604D series also supports Dual-active controllers which provide better fault tolerance and higher reliability of system operation.

Unparalleled Performance & Reliability

Supports Dual-active controller

Supports 802.3ad port trunking, Link Aggregation Control Protocol (LACP)

High data bandwidth of system architecture by powerful 64-bit RAID processor

Unsurpassed Data Availability

RAID 6 capability provides the highest level of data protection

Supports snapshot-on-the-box w/o relying on host software

Supports Microsoft Windows Volume Shadow Copy Services (VSS)

Exceptional Manageability Menu-driven front panel display

Management GUI via serial console, SSH telnet, Web and secure web(HTTPS)

Event notification via Email and SNMP trap

Menu-driven front panel display

Specifications

Model	EP-4604D-G1S3
RAID Controller	iSCSI-SAS
Controller	Redundant
Host Interface	Eight 1Gb/s Ethernet
Disk Interface	SAS 3Gb or SATA II*
Processor Type	Intel IOP342 64-bit (Chevelon dual core)
Cache Memory	4GB ~ 8GB DDR-II ECC SDRAM
Battery Backup	Optional Hot Pluggable BBM
Management Port support	Yes
Monitor Port support	Yes
UPS connection	Yes
RAID level	0, 1, 0+1, 3, 5, 6, 10, 30, 50, 60 and JBOD
Logical volume	Up to 1024
iSCSI Jumbo frame support	Yes
Supports Microsoft Multipath I/O (MPIO)	Yes
802.3ad Port Trunking, LACP Support	Yes
Host connection	Up to 32
Host clustering	Up to 16 for one logical volume
Manual/scheduling volume snapshot	Up to 32
Hot spare disks	Global and dedicated
Host access control	Read-Write & Read-Only
Online Volume migration	Yes
Online Volume sets expansion	Yes
Configurable stripe size	Yes
Auto volume rebuild	Yes
N-way mirror (N copies of the disk)	Yes
Microsoft Windows Volume Shadow	Yes
Supports CHAP authentication	Yes
S.M.A.R.T. support	Yes
Snapshot rollback mechanism support	Yes
Platform	Rackmount
Form Factor	4U
# of Hot Swap Trays	60
Tray Lock	Yes
Disk Status Indicator	Access / Fail LED
# of PS Modules	700W x 3 w/PFC
# of Fans	11
Power requirements	AC 90V ~ 264V Full Range, 12A ~ 6A, 47Hz ~ 63Hz (each module)
Environmental
Relative Humidity	10% ~ 85% Non-condensing
Operating Temp	10°C ~ 40°C (50°F ~ 104°F)
Physical Dimension	850(L) x 482.5(W) x 177(H) mm
Weight (Without Disk)	45Kg
* In dual controller mode, SAS drives are recommended since they are dual ported. Specification is subject to change without notice. All company and product names are trademarks of their respective owners.

Support

For iSCSI firmware,please contact your account manager !!

Documents


Datasheet	Manual
[499KB]	[4MB]

Awards & MediaReview

Award & MediaReview content