The EP-4423-S6S6 RAID subsystem features 6Gb SAS host performance to increase system efficiency and performance. It features high capacity expansion, with 42 hot-swappable SAS2/SATA3 hard disk drive bays in a 19-inch 4U rackmount unit, scaling to a maximum storage capacity in the terabyte range.
Exceptional ManageabilityModel | EP-4423-S6S6 |
---|---|
RAID Controller | 6Gb SAS – 6Gb SAS |
Host Interface | Two 6Gb/s SAS (SFF-8088) |
Disk Interface | 6Gb/s SAS, 6Gb/s SATA |
SAS Expansion | One 6Gb/s SAS (SFF-8088) |
Capacity | |
- Direct Attached | 42 Disks |
- Expansion | Up to 126 Disks |
Processor Type | 800MHz RAID-On-Chip storage processor |
Cache Memory | 1GB ~ 4GB DDR2-800 ECC Registered SDRAM |
Battery Backup | Optional |
Management Port support | Yes |
RAID Features | |
RAID level | 0, 1, 10(1E), 3, 5, 6, 30, 50, 60 and JBOD |
Array Group | Up to 128 |
LUNs | Up to 128 |
Hot Spare | Yes |
Drive Roaming | Yes |
Online Rebuild | Yes |
Variable Stripe Size | Yes |
E-mail Notification | Yes |
Online capacity expansion, RAID level /stripe size migration | Yes |
Online Array roaming | Yes |
Online consistency check | Yes |
SMTP manager and SNMP agent | Yes |
Redundant Flash image | Yes |
Instant availability and background initialization | Yes |
S.M.A.R.T. support | Yes |
MAID 2.0 | Yes |
Bad block auto-remapping | Yes |
Enclosure | |
Platform | Rackmount |
Form Factor | 4U |
# of Hot Swap Trays | 42 |
Tray Lock | Yes |
Disk Status Indicator | Access / Fail LED |
Backplane | SAS2 / SATA3 |
# of PS / Fan Modules | 1100W x 2 w/PFC |
# of Fans | 11 |
Power Requirements | AC 90V ~ 254V Full range, 50Hz~60Hz |
Environmental | |
Relative Humidity | 10% ~ 85% Non-condensing |
Operating Temp | 10°C ~ 40°C (50°F ~ 104°F) |
Physical Dimension | 810(L) x 482.6(W) x 176(H) mm |
Weight (Without Disk) | 48.5 Kg |
* Specification is subject to change without notice. All company and product names are trademarks of their respective owners. |
Firmware | Release Note |
---|---|
[819KB] | [120KB] |