PROWARE-By UNIFOSA-RAID,NAS,iSCSI and JBOD Srorage Provider

Features

Front-end 4 x 10Gb NIC ports per system with high availabiligy / load-balancing / fail-over support (802.3ad port trunking, LACP)

Supports iSCSI jumbo frame

Supports Microsoft Multipath I/O (MPIO)

Supports RAID levels 0, 1, 0+1, 3, 5, 6, 10, 30, 50, 60 and JBOD

Local N-way mirror: Extension to RAID 1 level, N copies of the disk

Global and dedicated hot spare disks

Write-through or write-back cache policy for different application usage

Supports greater than 2TB per volume set (64-bit LBA support)

Supports manual or scheduling volume snapshot (up to 32 snapshot)

Snapshot rollback mechanism

On-line volume migration with no system down-time

Online volume expansion

Instant RAID volume availability and background initialization

Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives

Overview

The EP-3164D-GAS3 RAID subsystem features two 10Gb iSCSI ports on each controller to increase system efficiency and performance. It features high capacity expansion, with 16 hot-swappable SAS/SATA II hard disk drive bays in a 19-inch 3U rackmount unit, scaling to a maximum storage capacity in the terabyte range. The EP-3164D-GAS3 also supports Dual-active controllers which provide better fault tolerance and higher reliability of system operation.

Unparalleled Performance & Reliability

Supports Dual-activecontrollers

Front-end 4 x 10Gb iSCSI ports

Supports 802.3ad port trunking, Link Aggregation Control Protocol (LACP)

High data bandwidth of system architecture by powerful 64-bit RAID processor

Unsurpassed Data Availability

RAID 6 capability provides the highest level of data protection

Supports snapshot-on-the-box w/o relying on host software

Supports Microsoft Windows Volume Shadow Copy Services (VSS)

Exceptional Manageability Menu-driven front panel display

Management GUI via serial console, SSH telnet, Web and secure web(HTTPS)

Event notification via Email and SNMP trap

Menu-driven front panel display

Specifications

Model	EP-3164D-GAS3
RAID Controller	iSCSI-SAS
Controller	Dual (Redundant)
Host Interface	Four 10Gb/s Ethernet
Disk Interface	SAS 3Gb or SATA II
SAS expander	4x mini SAS (3Gb/s)
Processor Type	Intel IOP342 64-bit (Chevelon dual core)
Cache Memory	4GB ~ 8GB DDR-II ECC SDRAM
Battery Backup	Optional Hot Pluggable BBM
Management Port support	Yes
Monitor Port support	Yes
UPS connection	Yes
RAID level	0, 1, 0+1, 3, 5, 6, 10, 30, 50, 60 and JBOD
Logical volume	Up to 1024
iSCSI Jumbo frame support	Yes
Supports Microsoft Multipath I/O (MPIO)	Yes
802.3ad Port Trunking, LACP Support	Yes
Host connection	Up to 32
Host clustering	Up to 16 for one logical volume
Manual/scheduling volume snapshot	Up to 32
Hot spare disks	Global and dedicated
Host access control	Read-Write & Read-Only
Online Volume migration	Yes
Online Volume sets expansion	Yes
Configurable stripe size	Yes
Auto volume rebuild	Yes
N-way mirror (N copies of the disk)	Yes
Microsoft Windows Volume Shadow Copy	Yes
Supports CHAP authentication	Yes
S.M.A.R.T. support	Yes
Snapshot rollback mechanism support	Yes
Platform	Rackmount
Form Factor	3U
# of Hot Swap Trays	16
Tray Lock	Yes
Disk Status Indicator	Access / Fail LED
Backplane	SAS / SATA II Single BP
# of PS/Fan Modules	500W x 2 w/PFC
# of Fans	4
Power requirements	AC 90V ~ 264V Full Range, 10A ~ 5A, 47Hz ~ 63Hz
Environmental
Relative Humidity	10% ~ 85% Non-condensing
Operating Temp	10°C ~ 40°C (50°F ~ 104°F)
Physical Dimension	566(L) x 482(W) x 131(H) mm
Weight (Without Disk)	22.5 Kg
* Specification are subject to change without notice. All company and product names are trademarks of their respective owners.

Support

For iSCSI firmware,please contact your account manager !!

Documents


Datasheet	Manual
[343KB]	[6.58MB]

Awards & MediaReview

Award & MediaReview content