EPICa Series EP-3164D-G1S3
iSCSI-SAS/SATAII Redundant RAID Subsystem
EPICa Series EP-3164D-G1S3
iSCSI-SAS/SATAII Redundant RAID Subsystem
Features
The EP-3164 series RAID subsystem features four Gigabit ports on each controller to increase system efficiency and performance. It features high capacity expansion, with 16 hot-swappable SAS/SATA II hard disk drive bays in a 19-inch 3U rackmount unit, scaling to a maximum storage capacity in the terabyte range. The EP-3164D series also supports Dual-active controllers which provide better fault tolerance and higher reliability of system operation.
Unparalleled Performance & Reliability| Model | EP-3164D-G1S3 |
|---|---|
| RAID Controller | iSCSI-SAS |
| Controller | Dual (Redundant) |
| Host Interface | Eight 1Gb/s Ethernet |
| Disk Interface | SAS 3Gb or SATA II |
| SAS expander | 4x mini SAS (3Gb/s) |
| Processor Type | Intel IOP342 64-bit (Chevelon dual core) |
| Cache Memory | 4GB ~ 8GB DDR-II ECC SDRAM |
| Battery Backup | Optional Hot Pluggable BBM |
| Management Port support | Yes |
| Monitor Port support | Yes |
| UPS connection | Yes |
| RAID level | 0, 1, 0+1, 3, 5, 6, 10, 30, 50, 60 and JBOD |
| Logical volume | Up to 1024 |
| iSCSI Jumbo frame support | Yes |
| Supports Microsoft Multipath I/O (MPIO) | Yes |
| 802.3ad Port Trunking, LACP Support | Yes |
| Host connection | Up to 32 |
| Host clustering | Up to 16 for one logical volume |
| Manual/scheduling volume snapshot | Up to 32 |
| Hot spare disks | Global and dedicated |
| Host access control | Read-Write & Read-Only |
| Online Volume migration | Yes |
| Online Volume sets expansion | Yes |
| Configurable stripe size | Yes |
| Auto volume rebuild | Yes |
| N-way mirror (N copies of the disk) | Yes |
| Microsoft Windows Volume Shadow Copy | Yes |
| Supports CHAP authentication | Yes |
| S.M.A.R.T. support | Yes |
| Snapshot rollback mechanism support | Yes |
| Platform | Rackmount |
| Form Factor | 3U |
| # of Hot Swap Trays | 16 |
| Tray Lock | Yes |
| Disk Status Indicator | Access / Fail LED |
| Backplane | SAS / SATA II Single BP |
| # of PS/Fan Modules | 500W x 2 w/PFC |
| # of Fans | 4 |
| Power requirements | AC 90V ~ 264V Full Range, 10A ~ 5A, 47Hz ~ 63Hz |
| Environmental | |
| Relative Humidity | 10% ~ 85% Non-condensing |
| Operating Temp | 10°C ~ 40°C (50°F ~ 104°F) |
| Physical Dimension | 566(L) x 482(W) x 131(H) mm |
| Weight (Without Disk) | 22.5 Kg |
| * Specification are subject to change without notice. All company and product names are trademarks of their respective owners. | |
For iSCSI firmware,please contact your account manager !!
Award & MediaReview content