EPICa Series EP-2243S/D-F4S3

2U 4Gb FC-SAS/SATAII RedundantRAID Subsystem

EPICa Series EP-2243S/D-F4S3

2U 4Gb FC-SAS/SATAII RedundantRAID Subsystem
  • proware-2u24bays-storage-front
  • proware-2u24bays-storage-leftsidebar
  • proware-2u24bays-d-storage-rear
  • proware-2u24bays-s-storage-rear


  • Fully redundant with hot swappable Controller, disks, cooling fans and power supplies
  • Modular Design With Common Parts
  • Supports RAID levels 0, 1, 0+1, 3, 5, 6, 30, 50, 60 and JBOD
  • Supports online Array roaming
  • Online RAID level/stripe size migration
  • Online capacity expansion and RAID level migration simultaneously
  • Online Volume Set Expansion
  • Supports multiple array enclosures per host connection
  • Supports greater than 2TB per volume set (64-bit LBA support)
  • Supports 4K bytes/sector for Windows up to 16TB per volume set
  • Support spin down drives when not in use to extend service (MAID 2.0)
  • Supports up to 128 LUNs per RAID set
  • Transparent data protection for all popular operating systems
  • RAID ADG provides the highest level of data protection
  • Instant availability and background initialization
  • Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
  • Supports hot spare and automatic hot rebuild
  • Local audible event notification alarm
  • Supports password protection
  • Built-in serial port interface for remote event notification
  • Redundant flash image for high availability
  • Unsurpassed Data Availability
  • High density 2U Rack Mount Support 24 2.5" SFF Disks
  • RAID 6 capability provides the highest level of data protection
  • Expansion capability up to 4 enclosures–total of 96 drives
  • Unparalleled Energy Saving
  • Low power consumption & Low heat production
  • MAID 2.0 20%~60% power savings
  • Exceptional Manageability
  • The firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration
  • The firmware-embedded SMTP manager monitors all system events and user notification automatically
  • The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
  • Menu-driven front panel display
  • Innovative Modular architecture
  • Model EP-2243S/D-F4S3
    RAID Controller FC-SAS / SATA II
    Controller Single or Redundant
    Host Interface Two / Four FC-AL(4Gb/s) , Two / Four FC-AL(8Gb/s)
    Disk Interface SAS or 3Gb/s SATA II
    SAS expander One 4x mini SAS (SFF-8088)
    - Direct Attached 24 Disks
    - Expansion Up to 96 Disks
    Processor Type Intel IOP341 64-bit
    Cache Memory 512MB ~ 4GB / 1GB ~ 8GB DDR-II SDRAM
    Battery Backup Optional
    Management Port Support Yes
    Monitor Port Support Yes
    RAID Features
    RAID level 0, 1, 10 (1E), 3, 5, 6, 30, 50, 60 and JBOD
    Array Group Up to 128
    LUNs Up to 128
    Hot Spare Yes
    Drive Roaming Yes
    Online Rebuild Yes
    Variable Stripe Size Yes
    E-mail Notification Yes
    Online capacity expansion, RAID level / stripe size migration Yes
    Online Array roaming Yes
    Online consistency check Yes
    SMTP manager and SNMP agent Yes
    Redundant Flash image Yes
    Instant availability and background initialization Yes
    S.M.A.R.T. support Yes
    MAID Yes
    Bad block auto-remapping Yes
    Platform Rackmount
    Form Factor 2U
    # of Hot Swap Trays 24 (2.5")
    Disk Status Indicator Access / Fail LED
    Backplane SAS / SATA II Single BP
    # of PS / Fan Modules 400W x 2 w/PFC
    # of Fans 2
    Power Requirements AC 90V ~ 264V Full Range, 8A ~ 4A, 47Hz ~ 63Hz
    Relative Humidity 10% ~ 85% Non-condensing
    Operating Temperature 10°C ~ 40°C (50°F ~ 104°F)
    Physical Dimension 559(L) x 483(W) x 88(H) mm
    Weight (Without Disk) 14 / 15Kg
    * Specification is subject to change without notice.
    All company and product names are trademarks of their respective owners.
    For FC(Fibre) firmware,please contact your account manager !!
    ep-2243sd_s3s3_f4s3_f8s3.pdf ep-2243sd-f4s3_v1.2.pdf
    Datasheet Manual
    [312KB] [10.6MB]
    Award & MediaReview content