PROWARE-By UNIFOSA-RAID,NAS,iSCSI and JBOD Srorage Provider

Features

Supports dual controller for features redundant RAID

Online RAID level/stripe size migration

Online capacity expansion and RAID level migration simultaneously

Online Volume Set Expansion

Supports multiple array enclosures per host connection

Supports greater than 2TB per volume set

Supports up to 128 LUNs

Transparent data protection for all popular operating systems

RAID ADG provides the highest level of data protection

Instant availability and background initialization

Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives

Local audible event notification alarm

Supports password protection

Serial port interface for remote event notification

Redundant flash image for high availability

Support spin down drives when not in use to extend service (MAID)

Supports Bad Blocks auto remapping and schedule volume check

Redundant active-active controller functionality ensures zero downtime or data loss

Fully redundant with hot swappable Controller, disks, cooling fans and power supplies

Supports hot spare and automatic hot rebuild

Overview

The EP-2123S/D-S3S3 Series RAID subsystem features 3Gb SAS host performance to increase system efficiency and performance. It features high capacity expansion, with 12 hot-swappable SAS/SATA II hard disk drive bays in a 19-inch 2U rackmount unit, scaling to a maximum storage capacity in the terabyte range. The EP-2123D Series also supports dual controllers which provide better fault tolerance and higher reliability of system operation.

Exceptional Manageability

The firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration

The firmware-embedded SMTP manager monitors all system events and user notification automatically

The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required

Menu-Driven front panel display

Innovative Modular architecture

Specifications

Model	EP-2123S/D-S3S3
RAID Controller	SAS-SAS
Controller	Single or Redundant
Host Interface	Two 4x mini SAS (3Gb/s) / Four 4x mini SAS (3Gb/s)
Disk Interface	SAS 3Gb or SATA II
SAS expansion	4x mini SAS (3Gb/s)
Capacity
- Direct Attached	12 Disks
- Expansion	Up to 96 Disks
Processor Type	Intel IOP341 64-bit
Cache Memory	512MB~4GB / 1GB~8GB DDR-II ECC SDRAM
Battery Backup	Optional
Management Port support	Yes
Monitor Port support	Yes
RAID Features
RAID level	0, 1, 0+1, 3, 5, 6, 30, 50, 60 and JBOD
Array Group	Up to 128
LUNs	Up to 128
Hot Spare	Yes
Drive Roaming	Yes
Online Rebuild	Yes
Variable Stripe Size	Yes
E-mail Notification	Yes
Online capacity expansion, RAID level / stripe size migration	Yes
Online Array roaming	Yes
Online consistency check	Yes
SMTP manager and SNMP agent	Yes
Redundant Flash image	Yes
Instant availability and background initialization	Yes
S.M.A.R.T. support	Yes
MAID	Yes
Bad block auto-remapping	Yes
Enclosure
Platform	Rackmount
Form Factor	2U
# of Hot Swap Trays	12
Tray Lock	Yes
Disk Status Indicator	Access / Fail LED
Backplane	SAS / SATA II Single BP
# of PS/Fan Modules	400W x 2 w/PFC
# of Fans	2
Power Requirements	AC 90V ~ 264V Full Range 8A ~ 4A, 47Hz ~ 63Hz
Environmental
Relative Humidity	10% ~ 85% Non-condensing
Operating Temp	10°C ~ 40°C (50°F ~ 104°F)
Physical Dimensions	590(L) x 482 (W) x 88(H) mm
Weight (Without Disk)	18.2 / 19.7 Kg
* Specification is subject to change without notice. All company and product names are trademarks of their respective owners.

Support


Single Controller	Firmware [740KB]	Release Note [10.8KB]
Dual Controller	Firmware [768KB]	Release Note [11.1KB]

Documents


Datasheet	Manual
[468KB]	[11.3MB]

Awards & MediaReview

Award & MediaReview content