PROWARE-By UNIFOSA-RAID,NAS,iSCSI and JBOD Srorage Provider

Controller Redundancy

Dual-active RAID controller with cache mirroring through dedicated high speed bus

Automatic synchronization of firmware version in the dual-active mode

Redundant controller operation with active/active and failover/failback function

Redundant flash image for controller availability

Management port seamless take-over

High availability

DataBolt™ Bandwidth Optimizer for balance faster host and slower SAS or SATA devices

RAID level 0, 1,10(1E), 3, 5, 6, 30, 50, 60, 00, 100, Single Disk and JBOD

Unparalleled Drive Support

Support for native 4K and 512 byte sector SAS and SATA devices

Support HDD firmware update

SSD automatic monitor clone (AMC) support

S.M.A.R.T. support

Energy Saving

Low power consumption & Low heat production

Support intelligent power management to save energy and extend service life

RAID Management

Access terminal menu by telnet via a LAN port

API library for customer to write its own monitor utility

Field-upgradeable firmware in flash ROM

Firmware-embedded manager via RS-232 port

Firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration

SAP management utility to easily manage multiple RAID units in the network

Overview

The EP-2123 series RAID subsystem features 16G FC-AL host performance to increase system efficiency and performance. The EP-2123 systems are equipped with 12 hot swappable SAS3/SATA3 hard disk drive bays. It can connect with expansion enclosures to accommodate up to 256 drives. The EP-2123D2 series also supports dual redundant controllers which provide better fault tolerance and higher reliability of system operation.

Specifications

Model	EP-2123S2/D2-FGSC
RAID Controller	16G FC – 12Gb SAS
Controller	Single or Redundant
Host Interface	Four / Eight FC-AL (16G FC) Optional: 32G FC SFP+ module
Disk Interface	12Gb SAS, 6Gb SATA HDD/SSD
SAS expansion	One / Two 12Gb SAS (SFF-8644)
- Direct Attached	12 Disks
- Expansion	Up to 256 Disks
Processor Type	1.2GHz Dual Core RAID-On-Chip processor
Cache Memory	2GB ~ 8GB DDR3-1866 ECC SDRAM (per controller)
Management Port Support	2 x RJ11 Serial Ports; 1 x RJ45 Ethernet Port
Battery Backup Module(BBM)	Optional
Flash-based Backup module (FBM)	Optional
RAID Features
RAID level	0, 1,10(1E), 3, 5, 6, 30, 50, 60, 00, 100, Single Disk and JBOD
LUNs	Up to 128
Hot Spare	Global and Dedicated
Stripe Size	Up to 1024KB
Cache writing approaches	Write-through or write-back
Online Rebuild	Yes
Automatic drive insertion / removal detection	Yes
Multiple RAID selection	Yes
Online Array roaming	Yes
Online RAID level / stripe size migration	Yes
Online capacity expansion	Yes
Online volume set growth	Yes
SNMP manager	Yes
E-mail Notification	Yes
Instant availability and background initialization	Yes
HDD Xfer Speed Test	Yes
Real time clock support	Yes
RAID clock Synchronization	Yes (Using NTP)
Multiple pairs SSD/HDD disk clone	Yes
Multi-Path I/O (MPIO) Support	Yes
Enclosure
Platform	Rackmount
Form Factor	2U
# of Hot Swap Trays	12
Tray Lock	Yes
Disk Status Indicator	Access / Fail LED
Backplane	SATA3 Single BP
# of PS / Fan Modules	400W x 2 w/PFC
# of Fans	2
Power Requirements	AC 90V ~ 264V Full Range 8A ~ 4A, 47Hz ~ 63Hz
Environmental
Relative Humidity	10% ~ 85% Non-condensing
Operating Temperature	10°C ~ 40°C (50°F ~ 104°F)
Physical Dimension	590(L) x 482 (W) x 88(H) mm
Weight (Without Disk)	18.2 / 19.7 Kg

Support

For FC(Fibre) firmware,please contact your account manager !!

Documents


Datasheet	Manual
[737KB]	[6.52MB]

Awards & MediaReview

Award & MediaReview content

Model	EP-2123S2/D2-FGSC
RAID Controller	16G FC – 12Gb SAS
Controller	Single or Redundant
Host Interface	Four / Eight FC-AL (16G FC) Optional: 32G FC SFP+ module
Disk Interface	12Gb SAS, 6Gb SATA HDD/SSD
SAS expansion	One / Two 12Gb SAS (SFF-8644)
- Direct Attached	12 Disks
- Expansion	Up to 256 Disks
Processor Type	1.2GHz Dual Core RAID-On-Chip processor
Cache Memory	2GB ~ 8GB DDR3-1866 ECC SDRAM (per controller)
Management Port Support	2 x RJ11 Serial Ports; 1 x RJ45 Ethernet Port
Battery Backup Module(BBM)	Optional
Flash-based Backup module (FBM)	Optional
RAID Features
RAID level	0, 1,10(1E), 3, 5, 6, 30, 50, 60, 00, 100, Single Disk and JBOD
LUNs	Up to 128
Hot Spare	Global and Dedicated
Stripe Size	Up to 1024KB
Cache writing approaches	Write-through or write-back
Online Rebuild	Yes
Automatic drive insertion / removal detection	Yes
Multiple RAID selection	Yes
Online Array roaming	Yes
Online RAID level / stripe size migration	Yes
Online capacity expansion	Yes
Online volume set growth	Yes
SNMP manager	Yes
E-mail Notification	Yes
Instant availability and background initialization	Yes
HDD Xfer Speed Test	Yes
Real time clock support	Yes
RAID clock Synchronization	Yes (Using NTP)
Multiple pairs SSD/HDD disk clone	Yes
Multi-Path I/O (MPIO) Support	Yes
Enclosure
Platform	Rackmount
Form Factor	2U
# of Hot Swap Trays	12
Tray Lock	Yes
Disk Status Indicator	Access / Fail LED
Backplane	SATA3 Single BP
# of PS / Fan Modules	400W x 2 w/PFC
# of Fans	2
Power Requirements	AC 90V ~ 264V Full Range 8A ~ 4A, 47Hz ~ 63Hz
Environmental
Relative Humidity	10% ~ 85% Non-condensing
Operating Temperature	10°C ~ 40°C (50°F ~ 104°F)
Physical Dimension	590(L) x 482 (W) x 88(H) mm
Weight (Without Disk)	18.2 / 19.7 Kg