proware_logo
proware_product_banner01

EPICa Series EP-1403-S3A3

1U 4bays, SAS - SATAII RAID Subsystem
proware-1u4bays-storage-front
EPICa Series EP-1403-S3A3
1U 4bays, SAS - SATAII RAID Subsystem
  • proware-1u4bays-storage-front
  • proware-1u4bays-storage-frontsidebar
  • proware-1u4bays-storage-frontopen
  • proware-1u4bays-storage-rear

Features

  • Supports RAID levels 0, 1, 10(1E), 3, 5, 6 and JBOD
  • Supports online array roaming
  • Online RAID level/stripe size migration
  • Online capacity expansion and RAID level migration simultaneously
  • Online volume set expansion
  • Supports multiple array enclosures per host connection
  • Supports greater than 2TB per volume set
  • Transparent data protection for all popular operating systems
  • RAID ADG provides the highest level of data protection
  • Instant availability and background initialization
  • Supports S.M.A.R.T, NCQ and OOB staggered Spin-up capable drives
  • Local audible event notification alarm
  • Supports password protection
  • Redundant flash image for high availability
  • Support spin down drives when not in use to extend service (MAID)
  • Supports bad blocks auto remapping and schedule volume check
  • Supports hot spare and automatic hot rebuild

    • Overview

    The Most cost-effective SATA II RAID Subsystem, the EP-1403 Series RAID subsystem features 3Gb SAS host interface to increase system efficiency and performance. It carries 4 hot-swappable SATA II hard disk drive bays in a 19-inch 1U rackmount unit, scaling the storage capacity of server in the terabyte range, provides a fast and easy way to install and upgrade your storage.

    Exceptional Manageability
  • The firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration
  • The firmware-embedded SMTP manager monitors all system events and user notification automatically
  • The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
  • Menu-driven front panel display

    • Specifications

    Model EP-1403-S3A3
    RAID Controller  
    RAID processor Intel IOP348 64 bit RISC
    Cache memory 512MB ~ 4GB DDR2 ECC SDRAM
    No.of channels (Host+Drive) 2+4
    Host interface Two 4x mini SAS(3Gb/s)
    Disk interface SATA II
    Management port support Yes
    Monitor port support Yes
    RAID Features  
    RAID level 0, 1, 10(1E), 3 , 5 , 6 and JBOD
    Array group Yes
    LUNs Yes
    Hot spare Yes
    Drive roaming Yes
    Online rebuild Yes
    Variable stripe size Yes
    E-mail notification Yes
    Online capacity expansion, RAID level / stripe size migration Yes
    Online array roaming Yes
    Online consistency check Yes
    SMTP manager and SNMP agent Yes
    Redundant flash image Yes
    Instant availability and background initialization Yes
    S.M.A.R.T. support Yes
    MAID Yes
    Bad block auto-remapping Yes
    Enclosure  
    Platform Rackmount
    Form factor 1U
    # of hot swap trays 4
    Tray lock Yes
    Disk status indicator Access / Fail LED
    Power supply 220W w/PFC
    # of fans 1
    Power requirements AC90V ~ 264V Full range 6A ~ 3A, 47Hz ~ 63Hz
    Environmental  
    Relative Humidity 10% ~ 85% Non-condensing
    Operating Temp 10°C ~ 40°C (50°F ~ 104°F)
    * Specification are subject to change without notice. All company and product names are trademarks of their respective

    Support

    6573-150-20120312.zip 6573-150-1010413.pdf
    Firmware Release Note
    [580KB] [10.8KB]

    Documents

    ep-1403_sa3_s3a3.pdf ep-1403-s3a3_v1.0.pdf
    Datasheet Manual
    [437KB] [2.89MB]

    Awards & MediaReview

    Award & MediaReview content