proware_product_banner01

Simbolo Series SB-3163E1-SA3

3U/16 bays, U320 SCSI-SATA II RAID Subsystem


Simbolo Series SB-3163E1-SA3

3U/16 bays, U320 SCSI-SATA II RAID Subsystem
  • proware-3u16bays-storage-front
  • proware-3u16bays-storage-leftsidebar
  • proware-3u16bays-storage-frontopen
  • proware-3u16bays-storage-rear

Features

  • Supports RAID levels 0, 1, 10(1E), 3, 5, 6 and JBOD
  • Supports online Array roaming
  • Online RAID level/stripe size migration
  • Online capacity expansion and RAID level migration simultaneously
  • Online Volume Set Expansion
  • Supports multiple array enclosures per host connection
  • Supports greater than 2TB per volume set
  • Transparent data protection for all popular operating systems
  • RAID ADG provides the highest level of data protection
  • Instant availability and background initialization
  • Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
  • Local audible event notification alarm
  • Supports password protection
  • Serial port interface for remote event notification
  • Redundant flash image for high availability
  • Support spin down drives when not in use to extend service (MAID)
  • Supports Bad Blocks auto remapping and schedule volume check
  • Supports hot spare and automatic hot rebuild
  • Your message has been sent. Thank you!
    * Please fill all required form field, thanks!
    Highest Density Available
  • 3U chassis with 16 bays carriers
  • Extraordinary Fault Tolerance
  • Advanced Data Guarding technology (RAID ADG) provides the highest level of data protection
  • RAID ADG can tolerate multiple simultaneous drive failures without downtime or data loss
  • Exceptional Manageability
  • The firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration
  • The firmware-embedded SMTP manager monitors all system events and user notification automatically
  • The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
  • Menu-driven front panel display
  • RAID Management
  • Smart-function LCD panel
  • Environmental monitoring unit
  • Real time drive activity and status indicators
  • Browser-based GUI management utility
  • Model SB-3163E1-SA3
    Form-factor 3U 19-inch rackmount chassis
    RAID processor Intel IOP348 64 bit RISC
    RAID level 0, 1, 10(1E), 3, 5, 6 JBOD
    Cache memory 512MB ~ 4GB DDRII ECC SDRAM
    No. of channels (host+drive) 2 + 16
    Host bus interface Two SCSI Ultra 320
    Drive bus interface SATA II
    Hot-swap drive trays Sixteen (16) 1-inch trays
    Hot-swappable power supplies Three (3) 300W power supplies w / PFC
    Cooling fans 2 (blower)
    Battery backup Option
    Drive Roaming Yes
    Online Rebuild Yes
    Online consistency check Yes
    SMTP manager and SNMP agent Yes
    Redundant Flash image Yes
    Instant availability and background initialization Yes
    R-Link support Yes
    SNMP Protocol Support Yes
    S.M.A.R.T Yes
    Online Array roaming Yes
    MAID Yes
    Bad block auto-remapping Yes
    Power requirements AC 90V ~ 254V Full Range 12A / 6A at 110V / 220V, 50Hz/60Hz
    Environmental  
    Relative Humidity 10% ~ 85% Non-condensing
    Operating Temp 10°C ~ 40°C (50°F ~ 104°F)
    Physical Dimensions 133(H) x 482(W) x 609(D) mm
    Weight (Without Disk) 20.5kgs / 45.1Lbs
    Function: ※New disk auto spare ※Host independent ※Environment monitor ※Online expansion ※Continuous rebuild ※Online consistency check ※Failed drive auto rebuild ※Failed drive indicators ※Audible alarm ※Password protection ※UPS connection ※Bad block auto-remapping ※Multiple RAID selection ※Online RAID level migration ※E-mail Notification
    6373-150-20120312.zip 6373-150-1010413.pdf
    Firmware Release Note
    [485KB] [10.4MB]
    sb-3163e1-sa3.pdf sb-3163e1-sa3_v1.0.pdf
    Datasheet Manual
    [345KB] [3.99MB]
    Award & MediaReview content