proware_product_banner01

EPICa Series EP-T803E1-F4A3

8bays Tower, 4Gb FC-SATAII RAID Subsystem


EPICa Series EP-T803E1-F4A3

8bays Tower, 4Gb FC-SATAII RAID Subsystem
  • proware-t803-storage-front
  • proware-t803-storage-leftsidebar
  • proware-t803-storage-rear

Features

  • Supports RAID levels 0, 1, 10(1E), 3, 5, 6 and JBOD
  • Supports online Array roaming
  • Online RAID level/stripe size migration
  • Online capacity expansion and RAID level migration simultaneously
  • Online Volume Set Expansion
  • Supports multiple array enclosures per host connection
  • Supports greater than 2TB per volume set
  • Transparent data protection for all popular operating systems
  • RAID ADG provides the highest level of data protection
  • Instant availability and background initialization
  • Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
  • Local audible event notification alarm
  • Supports password protection
  • Serial port interface for remote event notification
  • Redundant flash image for high availability
  • Support spin down drives when not in use to extend service (MAID)
  • Supports Bad Blocks auto remapping and schedule volume check
  • Supports hot spare and automatic hot rebuild
  • Your message has been sent. Thank you!
    * Please fill all required form field, thanks!
    Highest Density Available
  • Small Desktop Tower with 8 bays carriers
  • Extraordinary performance
  • Advanced data guarding technology (RAID ADG) provides the highest level of data protection
  • RAID ADG can tolerate two simultaneous drive failures without downtime or data loss
  • Exceptional Manageability
  • The firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration
  • The firmware-embedded SMTP manager monitors all system events and user notification automatically
  • The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
  • Menu-driven front panel display
  • Green Power
  • MAID(Massive Arrays of Idle Disks) support
  • Model EP-T803E1-F4A3
    Form-factor 8 Bays Tower
    RAID processor Intel IOP348 64 bit RISC
    RAID level 0, 1, 10(1E), 3, 5, 6, JBOD
    Cache memory 512MB ~ 4GB DDRII ECC SDRAM
    No. of channels (host+drive) 2 + 8
    Host bus interface FC-AL x 2 (4Gb/s)
    Drive bus interface SATA II (3Gb/s, NCQ)
    Data transfer rate Up to 400MB/Sec
    Hot-swap drive trays Eight (8) 1-inch trays
    Online capacity expansion, RAID level/stripe size migration Yes
    Online volume sets expansion Yes
    Online array roaming Yes
    Online consistency check Yes
    SMTP manager and SNMP agent Yes
    E-mail notification Yes
    Redundant Flash image Yes
    R-Link support Yes
    Support over 2TB per volume Yes
    Instant availability and background initialization Yes
    S.M.A.R.T. support Yes
    New disk insertion / removal detection Yes
    Failed drive auto rebuild Yes
    Continuous rebuild Yes
    Multiple RAID selection Yes
    Bad block auto-remapping Yes
    Audial alarm Yes
    Password protection Yes
    Tray lock Yes
    Hot-swap power supplies 300W w/ PFC
    Cooling fans 2
    Battery backup Option
    Power requirements AC 90V ~ 240V Full Range, 6A / 3A at 115V / 230V, 47Hz ~ 63Hz
    Environmental  
    Relative Humidity 10% ~ 85% Non-condensing
    Operating Temp 10°C ~ 40°C (50°F ~ 104°F)
    Physical Dimensions 351.4(H) x 155(W) x 400.6(D) mm
    Weight (Without Disk) 9.8kgs
    * Specification are subject to change without notice. All company and product names are trademarks of their respective owners.
    For FC(Fibre) firmware, please contact your account manager !!
    ep-t803e1_sa3_s3a3_f4a3.pdf EP-T803E1-F4A3_v1.0.pdf
    Datasheet Manual
    [327KB] [3.33MB]
    Award & MediaReview content