proware_product_banner01

EPICa Series EP-4643J/JD-S6S6

4U 64Bays 6Gb SAS JBOD Enclosure Solution


EPICa Series EP-4643J/JD-S6S6

4U 64Bays 6Gb SAS JBOD Enclosure Solution
  • proware-4u64bays-storage-front
  • proware-4u64bays-storage-aerialview
  • proware-4u64bays-j-storage-rear
  • proware-4u64bays-jd-storage-rear

Features

  • 64 hot-swappable drive bays in a rackmount 4U chassis
  • Simultaneously support SAS2 or SATA3 disk
  • Single or dual SAS2 JBOD controller module
  • Each SAS2 JBOD controller module consist of three mini SAS (4X) port
  • Power Supply and cooling system contained in 1 module for efficient cooling
  • Two 1100W redundant hot swappable power supplies
  • Incorporates a cableless design for maximum signal integrity
  • Utilizes industry-standard SCSI Enclosure Services to monitor enclosure and disk environmental conditions
  • Your message has been sent. Thank you!
    * Please fill all required form field, thanks!

    The EPICa EP-4643J/JD-S6S6 is a 19-inch 4U rackmount JBOD unit. It features the latest SAS2 (6Gb/s) interface and designed to fit in with the environments which needed highly reliable and relentless data growth. The EP-4643J/JD-S6S6 is also a versatile SAS2 / SATA3 Disk Expansion system, ideal for high capacity and scalability storage in IT demands. Based on the 6G SAS2.0 technology, the EP-4643J/JD-S6S6 supporting the choice of SAS2 and SATA3 drive configurations to deliver the best cost-performance index with higher bandwidth.

    Exceptional Manageability
  • S.E.S. support for standard enclosure management
  • System LED indications
  • Fan speed monitoring
  • Power supply monitoring
  • System voltage monitoring
  • System temperature monitoring
  • System alarm
  • Model EP-4643J/JD-S6S6
    RAID controller JBOD
    Controller Single / Redundant
    Host Interface One / Two 6Gb/s SAS (SFF-8088)
    Disk Interface 6Gb/s SAS, 6Gb/s SATA
    SAS Expansion Two / Four 6Gb/s SAS (SFF-8088)
    Capacity  
    Direct attached 64 Disks
    Expansion Refers to controller specification
    Monitor port support Yes
    Enclosure  
    Platform Rackmount
    Form factor 4U
    # of hot swap trays 64
    Tray lock Yes
    Disk status indicator Access / Fail LED
    Backplane SAS2 / SATA3
    # of PS/Fan modules 1100W x 2 w/PFC
    # of fans 15
    Power requirements AC 90V ~ 254V Full Range, 50Hz~60Hz
    Environmental  
    Relative Humidity 10% ~ 85% Non-condensing
    Operating Temp 10°C ~ 40°C (50°F ~ 104°F)
    Physical Dimension 900(L) x 482.6 (W) x 177(H) mm
    Weight (Without disk) 43.5/45Kg
    * Specification is subject to change without notice. All company and product names are trademarks of their respective owners.
    8016-20121017-14.BD.00.09.zip 8016-8016-14-1041007.pdf
    Firmware Release Note
    [200KB] [177KB]
    Award & MediaReview content