proware_product_banner01

EPICa Series EP-4604D-GAS3

4U 60Bay iSCSI-SAS/SATAII Redundant RAID Subsystem

vmwareready

EPICa Series EP-4604D-GAS3

4U 60Bay iSCSI-SAS/SATAII Redundant RAID Subsystem
vmwareready
  • proware-4u60bays-storage-front
  • proware-4u60bays-storage-aerialview
  • proware-4u60bays-d-storage-rear

Features

  • 60 hot-swappable disk drive bays which support SAS/SATA disks
  • Supports iSCSI jumbo frame
  • Supports Microsoft Multipath I/O (MPIO)
  • Supports RAID levels 0, 1, 0+1, 3, 5, 6, 10, 30, 50, 60 and JBOD
  • Local N-way mirror: Extension to RAID 1 level, N copies of the disk
  • Global and dedicated hot spare disks
  • Write-through or write-back cache policy for different application usage
  • Supports greater than 2TB per volume set (64-bit LBA support)
  • Supports manual or scheduling volume snapshot (up to 32 snapshot)
  • Snapshot rollback mechanism
  • On-line volume migration with no system down-time
  • Online volume expansion
  • Instant RAID volume availability and background initialization
  • Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
  • High efficiency power supply which compliant with 80plus
  • Your message has been sent. Thank you!
    * Please fill all required form field, thanks!

    The EP-4604D series RAID subsystem features high density disks capacity with 1/10 Gigabit ports on each controller to increase system efficiency and performance. It features high capability of expansion, with 60 hot-swappable SAS/SATA hard disk drive bays in a 19-inch 4U rackmount unit, scaling to a maximum storage capacity in the terabyte range. The EP-4604D series also supports Dual-active controllers which provide better fault tolerance and higher reliability of system operation.

    Unparalleled Performance & Reliability
  • Supports Dual-active controller
  • Supports 802.3ad port trunking, Link Aggregation Control Protocol (LACP)
  • High data bandwidth of system architecture by powerful 64-bit RAID processor
  • Unsurpassed Data Availability
  • RAID 6 capability provides the highest level of data protection
  • Supports snapshot-on-the-box w/o relying on host software
  • Supports Microsoft Windows Volume Shadow Copy Services (VSS)
  • Exceptional Manageability Menu-driven front panel display
  • Management GUI via serial console, SSH telnet, Web and secure web(HTTPS)
  • Event notification via Email and SNMP trap
  • Menu-driven front panel display
  • Model EP-4604D-GAS3
    RAID Controller iSCSI-SAS
    Controller Redundant
    Host Interface Four 10Gb/s Ethernet
    Disk Interface SAS 3Gb or SATA II*
    Processor Type Intel IOP342 64-bit (Chevelon dual core)
    Cache Memory 4GB ~ 8GB DDR-II ECC SDRAM
    Battery Backup Optional Hot Pluggable BBM
    Management Port support Yes
    Monitor Port support Yes
    UPS connection Yes
    RAID level 0, 1, 0+1, 3, 5, 6, 10, 30, 50, 60 and JBOD
    Logical volume Up to 1024
    iSCSI Jumbo frame support Yes
    Supports Microsoft Multipath I/O (MPIO) Yes
    802.3ad Port Trunking, LACP Support Yes
    Host connection Up to 32
    Host clustering Up to 16 for one logical volume
    Manual/scheduling volume snapshot Up to 32
    Hot spare disks Global and dedicated
    Host access control Read-Write & Read-Only
    Online Volume migration Yes
    Online Volume sets expansion Yes
    Configurable stripe size Yes
    Auto volume rebuild Yes
    N-way mirror (N copies of the disk) Yes
    Microsoft Windows Volume Shadow Yes
    Supports CHAP authentication Yes
    S.M.A.R.T. support Yes
    Snapshot rollback mechanism support Yes
    Platform Rackmount
    Form Factor 4U
    # of Hot Swap Trays 60
    Tray Lock Yes
    Disk Status Indicator Access / Fail LED
    # of PS Modules 700W x 3 w/PFC
    # of Fans 11
    Power requirements AC 90V ~ 264V Full Range,
    12A ~ 6A, 47Hz ~ 63Hz (each module)
    Environmental  
    Relative Humidity 10% ~ 85% Non-condensing
    Operating Temp 10°C ~ 40°C (50°F ~ 104°F)
    Physical Dimension 850(L) x 482.5(W) x 177(H) mm
    Weight (Without Disk) 45Kg
    * In dual controller mode, SAS drives are recommended since they are dual ported.
    Specification is subject to change without notice. All company and product names are trademarks of their respective owners.
    For iSCSI firmware,please contact your account manager !!
    ep-4604d_g1s3_gas3.pdf EP-4604D-GAS3_v1.0.pdf
    Datasheet Manual
    [499KB] [4.01MB]
    Award & MediaReview content