proware_product_banner01

EPICa Series EP-3164J1/JD1-S6S6

3U 16Bays SASII JBOD Enclosure Solution


EPICa Series EP-3164J1/JD1-S6S6

3U 16Bays SASII JBOD Enclosure Solution
  • proware-3u16bays-storage-front
  • proware-3u16bays-storage-leftsidebar
  • proware-3u16bays-storage-frontopen
  • proware-3u16bays-j1-storage-rear
  • proware-3u16bays-jd1-storage-rear

Features

  • 16 hot-swappable drive bays in a rackmount 3U chassis
  • Simultaneously support SAS or SATA disk
  • Each SAS JBOD controller module consist of two 6G mini SAS (4x) port
  • Power Supply and cooling system contained in 1 module for efficient cooling
  • Two 460W redundant hot swappable power supplies
  • Incorporates a cableless design for maximum signal integrity
  • Utilizes industry-standard SCSI Enclosure Services to monitor enclosure and disk environmental conditions
  • Enclosure monitoring

  • S.E.S. support for standard enclosure management
  • System LED indications
  • Fan speed monitoring
  • Power supply monitoring
  • System voltage monitoring
  • System temperature monitoring
  • System alarm
  • Your message has been sent. Thank you!
    * Please fill all required form field, thanks!

    The EPICa EP-3164J1/JD1-S6S6 is a 19-inch 3U 16 bays rackmount JBOD unit. It features the latest SASII (6Gb/s) interface and designed to fit in with the environments which needed highly reliable and relentless data growth. The EP-3164J1/JD1-S6S6 is also a versatile SAS2 / SATA3 Disk Expansion system, ideal for high capacity and scalability storage in IT demands. Based on the 6G SAS technology, the EP-3164J1/JD1-S6S6 supporting the choice of SAS2 and SATA3 drive configurations to deliver the best cost-performance index with higher bandwidth.

    Model EP-3164J1/JD1-S6S6
    RAID controller JBOD
    Controller Single / Dual
    Host Interface One / Two 4x mini SAS (6Gb/s)
    Disk Interface SAS 3Gb/6Gb or SATA II / III *
    SAS expansion One / Two 4x mini SAS (6Gb/s)
    S.M.A.R.T. support Yes
    Platform Rackmount
    Form Factor 3U
    # of Hot Swap Trays 16
    Tray Lock Yes
    Disk Status Indicator Access / Fail LED
    Backplane SAS2 / SATA3 Single BP
    # of PS/Fan Modules 460W x 2 w/PFC (80 plus)
    # of Fans 2
    Power requirements AC 90V ~ 264V Full Range, 10A ~ 5A, 47Hz ~ 63Hz
    Relative Humidity 10% ~ 85% Non-condensing
    Operating Temp 10°C ~ 40°C (50°F ~ 104°F)
    Physical Dimensions 555(L) x 482(W) x 131(H) mm
    Weight (Without disk) 19 Kg / 20.5 Kg
    * Specification are subject to change without notice.All company and product names are trademarks of their respective owners.
    * In dual controller mode, SAS drives are recommended since they are dual ported.
    For iSCSI firmware, please contact your account manager !!
    ep-3164j1jd1_s6s6.pdf EP-3164J1_JD1-S6S6_v1.0.pdf
    Datasheet Manual
    [636KB] [2.14MB]
    Award & MediaReview content