proware_product_banner01

EPICa Series EP-2803E1-SA3

2U 8bays, SCSI U320 – SATAII RAID Subsystem


EPICa Series EP-2803E1-SA3

2U 8bays, SCSI U320 – SATAII RAID Subsystem
  • roware-2u8bays-storage-front
  • proware-2u8bays-storage-leftsidebar
  • proware-2u8bays-storage-rear

Features

  • Supports online array roaming
  • Online RAID level/stripe size migration
  • Online capacity expansion and RAID level migration simultaneously
  • Online volume set expansion
  • Supports multiple array enclosures per host connection
  • Supports greater than 2TB per volume set
  • Transparent data protection for all popular operating systems
  • RAID ADG provides the highest level of data protection
  • Instant availability and background initialization
  • Supports S.M.A.R.T, NCQ and OOB staggered Spin-up capable drives
  • Local audible event notification alarm
  • Supports password protection
  • Serial port interface for remote event notification
  • Redundant flash image for high availability
  • Support spin down drives when not in use to extend service (MAID)
  • Supports bad blocks auto remapping and schedule volume check
  • Supports hot spare and automatic hot rebuild
  • Your message has been sent. Thank you!
    * Please fill all required form field, thanks!

    The most cost-effective SATA II RAID subsystem, the EP-2803E1 series RAID subsystem features SCSI U320 host interface to increase system efficiency and performance. It carries 8 hot-swappable SATA II hard disk drive bays in a 19-inch 2U rackmount unit, scaling the storage capacity of server in the terabyte range, provides a fast and easy way to install and upgrade your storage.

    Exceptional Manageability
  • The firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration
  • The firmware-embedded SMTP manager monitors all system events and user notification automatically
  • The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
  • Menu-driven front panel display
  • Model EP-2803E1-SA3
    RAID Controller  
    RAID processor Intel IOP348 64 bit RISC
    Cache memory 512MB ~ 4GB DDRII ECC SDRAM
    No.of channels (Host+Drive) 2+8
    Host Interface Two SCSI Ultra 320
    Disk Interface SATA II
    Management port support Yes
    Monitor port support Yes
    RAID Features  
    RAID level 0, 1, 10(1E), 3, 5, 6 and JBOD
    Array group Yes
    LUNs Yes
    Hot spare Yes
    Drive roaming Yes
    Online rebuild Yes
    Variable stripe size Yes
    E-mail notification Yes
    Online capacity expansion, RAID level / stripe size migration Yes
    Online array roaming Yes
    Online consistency check Yes
    SMTP manager and SNMP agent Yes
    Redundant flash image Yes
    Instant availability and background initialization Yes
    S.M.A.R.T. support Yes
    MAID Yes
    Bad block auto-remapping Yes
    Enclosure  
    Platform Rackmount
    Form factor 2U
    # of hot swap trays 8
    Tray lock Yes
    Disk status indicator Access / Fail LED
    Power supply 300W x 2
    # of fans 4
    Power requirements AC110V / 220
    6A / 3A, 47Hz / 63Hz
    Environmental  
    Relative humidity 10% ~ 85% Non-condensing
    Operating temp 10°C ~ 40°C (50°F ~ 104°F)
    Physical dimensions 88 (H) x 482(W) x 500 (D) mm
    Weight (without Drives) 12.5Kg
    * Specification is subject to change without notice.
    All company and product names are trademarks of their respective owners.
    6373-150-20120312.zip 6373-150-1010413.pdf
    Firmware Release Note
    [485KB] [10.4MB]
    ep-2803e1_sa3_s3a3_f4a3.pdf ep-2803e1-sa3_v1.0.pdf
    Datasheet Manual
    [633KB] [7.25MB]
    Award & MediaReview content