proware_product_banner01

EPICa Series EP-2243S1/D1-FGS6

2U 16Gb FC–6Gb SAS Redundant RAID Subsystem

citrix_ready

EPICa Series EP-2243S1/D1-FGS6

2U 16Gb FC–6Gb SAS Redundant RAID Subsystem
citrix_ready
  • proware-2u24bays-storage-front
  • proware-2u24bays-storage-leftsidebar
  • proware-2u24bays-d1-storage-rear
  • proware-2u24bays-s1-storage-rear

Features

  • Supports RAID levels 0, 1, 10(1E), 3, 5, 6, 30, 50, 60 and JBOD
  • Supports online Array roaming
  • Online RAID level/stripe size migration
  • Online capacity expansion and RAID level migration simultaneously
  • Support global and dedicated hot spare
  • Online Volume Set Expansion
  • Support multiple array enclosures per host connection
  • Greater than 2TB per volume set (64-bit LBA support)
  • Greater than 2TB per disk drive
  • Supports 4K bytes/sector for Windows up to 16TB per volume set
  • Disk scrubbing/ array verify scheduling for automatic repair of all configured RAID sets
  • Login record in the event log with IP address and service (http,telnet and serial)
  • Support intelligent power management to save energy and extend service life
  • Support NTP protocol to synchronize RAID controller clock over the on-board LAN port
  • Max 128 LUNs (volume set)
  • Transparent data protection for all popular operating systems
  • Instant availability and background initialization
  • Multi-path & load-balancing support
  • Automatic synchronization of firmware version in the dual-active mode
  • Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
  • Supports hot spare and automatic hot rebuild
  • Local audible event notification alarm
  • Redundant flash image for high availability
  • Real time clock support
  • Your message has been sent. Thank you!
    * Please fill all required form field, thanks!
    * Please fill all required form field, thanks!

    The EP-2243 series RAID subsystem features 16Gb FC-AL host performance to increase system efficiency and performance. It features high capacity expansion, with 24 hot-swappable SAS2/SATA3 hard disk drive bays in a 19-inch 2U rackmount unit, scaling to a maximum storage capacity in the terabyte range. The EP- 2243D1 series also supports dual controllers which provide better fault tolerance and higher reliability of system operation.

    Highest Density Available
  • 2U chassis with 24 bays carriers
  • Support the latest 2.5"enterprise class SAS/SATA disk drives
  • Unsurpassed Data Availability
  • RAID 6 capability provides the highest level of data protection
  • Expansion capability up to 11 enclosures – total of 264 drives
  • Unparalleled Energy Saving
  • Low power consumption & Low heat production
  • MAID 2.0 20%~60% power savings
  • Exceptional Manageability
  • The firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration
  • The firmware-embedded SMTP manager monitors all system events and user notification automatically
  • The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
  • Menu-driven front panel display
  • Innovative Modular architecture
  • Model EP-2243S1/D1-FGS6
    RAID Controller 16Gb FC–6Gb SAS
    Controller Single or Redundant
    Host Interface Two / Four FC-AL (16 Gb/s)
    Disk Interface 6Gb/s SAS, 6Gb/s SATA
    SAS expansion One / Two 6Gb/s SAS (SFF-8088)
    Capacity  
    - Direct Attached 24 Disks
    - Expansion Up to 264 Disks
    Processor Type 800MHz Dual Core RAID-On-Chip processor
    Cache Memory 2GB ~ 8GB / 4GB ~ 16GB DDR3-1333 ECC SDRAM
    Battery Backup Optional
    Management Port support Yes
    RAID Features  
    RAID level 0, 1, 10(1E), 3, 5, 6, 30, 50, 60 and JBOD
    Array Group Up to 128
    LUNs Up to 128
    Hot Spare Yes
    Drive Roaming Yes
    Online Rebuild Yes
    Variable Stripe Size Yes
    E-mail Notification Yes
    Online capacity expansion, RAID level /stripe size migration Yes
    Online Array roaming Yes
    Online consistency check Yes
    SMTP manager and SNMP agent Yes
    Redundant Flash image Yes
    Instant availability and background initialization Yes
    S.M.A.R.T. support Yes
    MAID 2.0 Yes
    Bad block auto-remapping Yes
    Enclosure  
    Platform Rackmount
    Form Factor 2U
    # of Hot Swap Trays 24(2.5")
    Disk Status Indicator Access / Fail LED
    Backplane SAS2 / SATA3 Single BP
    # of PS / Fan Modules 400W x 2 w/PFC
    # of Fans 2
    Power Requirements AC 90V ~ 264V Full Range 8A ~ 4A, 47Hz ~ 63Hz
    Environmental  
    Relative Humidity 10% ~ 85% Non-condensing
    Operating Temp 10°C ~ 40°C (50°F ~ 104°F)
    Physical Dimension 559(D) x 483(W) x 88(H) mm
    Weight (Without Disk) 14 / 15 Kg
    * Specification are subject to change without notice.
    All company and product names are trademarks of their respective owners.
    For FC(Fibre) firmware,please contact your account manager !!
    ep-2243s1d1_fgs6.pdf EP-2243S1D1-FGS6_v1.0.pdf
    Datasheet Manual
    [659KB] [4.27MB]
    Award & MediaReview content