TRAP-NAS3-MIB	DEFINITIONS ::= BEGIN
	IMPORTS	ucdExperimental FROM UCD-SNMP-MIB;
	
-- 06262012
	NAS3-Traps OBJECT IDENTIFIER ::= { ucdExperimental 1000 }

-- TEST 1
	sendTrapTest NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Send Trap Test"
		::= { NAS3-Traps 1 }

	snapVolUsageNotify NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Snapshot volume usage notify, 
			this is notify to check snapshot usage."
		::= { NAS3-Traps 127 }
		
-- Storage 128
	volAlmostFull NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Volume almost full."
		::= { NAS3-Traps 128 }

	snapVolAlmostFull NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Snapshot volume almost full, 
			it will become invalid when full."
		::= { NAS3-Traps 129 }

	repDisconnect NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Replication disconnected, sync task stopped."
		::= { NAS3-Traps 130 }
		
-- Monitor 131
	diskTempFail NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Disk temp too high( Over 65 )"
		::= { NAS3-Traps 131 }
		
	diskFail NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Disk status not Normal"
		::= { NAS3-Traps 132 }

	raidFail NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Raid status not Normal"
		::= { NAS3-Traps 133 }

	fanFail NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"FAN speed too low ( lower than 1500 )"
		::= { NAS3-Traps 134 }
		
	cpuTempFail NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"CPU temp too high( Over 65 )"
		::= { NAS3-Traps 135 }
		
	powerFail NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"One of Power is fail."
		::= { NAS3-Traps 136 }	

	xfsFail NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"XFS file system internal error."
		::= { NAS3-Traps 137 }		

	raidStartRebuild NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"RAID Start Rebuild."
		::= { NAS3-Traps 138 }	

	raidRebuildFinish NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"RAID Rebuild Finish."
		::= { NAS3-Traps 139 }			
	
	initialReplicationInfo NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Initial Replication."
		::= { NAS3-Traps 140 }	
	
	replicationDisconnectError NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Replication disconnect."
		::= { NAS3-Traps 141 }	
	
	replicationReconnectInfo NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Replication Reconnect."
		::= { NAS3-Traps 142 }	
-- RSYNC 150
	rsyncBackupDone NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Rsync backup is finish."
		::= { NAS3-Traps 150 }
	rsyncBackup151 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"password file must not be other-accessible"
		::= { NAS3-Traps 151 }
	rsyncBackup152 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Destination No such file or directory"
		::= { NAS3-Traps 152 }
	rsyncBackup153 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No route to host"
		::= { NAS3-Traps 153 }
	rsyncBackup154 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"auth failed"
		::= { NAS3-Traps 154 }
	rsyncBackup155 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"remote path must start with a module name"
		::= { NAS3-Traps 155 }
	rsyncBackup156 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Unknown error"
		::= { NAS3-Traps 156 }
-- snapshot 180
	snapshot180 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"snapshot is executed successfully"
		::= { NAS3-Traps 180 }
	snapshot181 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Failed to execute snapshot"
		::= { NAS3-Traps 181 }
	snapshot182 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Failed to write snapshot record to database"
		::= { NAS3-Traps 182 }
	snapshot183 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Volume Group has insufficient free space"
		::= { NAS3-Traps 183 }
-- rsnapshot 184
	rsnapshot184 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Executing Rsnapshot aborted. Latest rsnapshot has been removed due to previous errors."
		::= { NAS3-Traps 184 }
	rsnapshot185 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Executing Rsnapshot aborted. Cause is identified with user defined signal SIG_USR1."
		::= { NAS3-Traps 185 }
	rsnapshot186 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Executing Rsnapshot aborted. Cause is identified with user defined signal SIG_USR2."
		::= { NAS3-Traps 186 }
	rsnapshot187 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Executing Rsnapshot aborted. Cause is identified with system signal SIG_HUP."
		::= { NAS3-Traps 187 }
	rsnapshot188 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Executing Rsnapshot aborted. Cause is identified with system signal SIG_INT, user interrupt."
		::= { NAS3-Traps 188 }
	rsnapshot189 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Executing Rsnapshot aborted. Cause is identified with system signal SIG_TERM, system shutdown / power failure."
		::= { NAS3-Traps 189 }
-- rsnapshot 190
	rsnapshot190 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"rsnapshot is executed successfully"
		::= { NAS3-Traps 190 }
	rsnapshot191 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Failed to execute rsnapshot"
		::= { NAS3-Traps 191 }
	rsnapshot192 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Failed to write rsnapshot record to database"
		::= { NAS3-Traps 192 }
	rsnapshot193 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Volume Group has insufficient free space"
		::= { NAS3-Traps 193 }
	rsnapshot194 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Failed to execute rsnapshot.  Update rsnapshot_plan_list failed."
		::= { NAS3-Traps 194 }
	rsnapshot195 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Failed to execute rsnapshot.  Update rsnapshot_record failed."
		::= { NAS3-Traps 195 }
	rsnapshot196 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"missing source"
		::= { NAS3-Traps 196 }
	rsnapshot197 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"missing destination"
		::= { NAS3-Traps 197 }
	rsnapshot198 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"destination not enough free space"
		::= { NAS3-Traps 198 }
	rsnapshot199 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Refer to console displayed message."
		::= { NAS3-Traps 199 }
-- Backup 200
	dataBackupDone NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Backup completed."
		::= { NAS3-Traps 200 }
	dataBackupFail201 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No such file or directory."
		::= { NAS3-Traps 201 }
	dataBackupFail202 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No such device or address."
		::= { NAS3-Traps 202 }
	dataBackupFail203 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No route to host."
		::= { NAS3-Traps 203 }
	dataBackupFail204 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"tar (child) Error is not recoverable."
		::= { NAS3-Traps 204 }
	dataBackupFail205 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No space left on device."
		::= { NAS3-Traps 205 }
	dataBackupFail206 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Permission denied."
		::= { NAS3-Traps 206 }
	dataBackupFail207 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"DX device has no label."
		::= { NAS3-Traps 207 }
	dataBackupFail208 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Invalid argument."
		::= { NAS3-Traps 208 }
	dataBackupFail209 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Bad file descriptor."
		::= { NAS3-Traps 209 }
	dataBackupFail210 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Connection refused."
		::= { NAS3-Traps 210 }
	dataBackupFail211 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Input/output error."
		::= { NAS3-Traps 211 }
	dataBackupFail212 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"is not a valid block."
		::= { NAS3-Traps 212 }
	dataBackupFail213 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"wrong fs type."
		::= { NAS3-Traps 213 }
	dataBackupFail214 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No device found."
		::= { NAS3-Traps 214 }
	dataBackupFail215 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Device is used by other process."
		::= { NAS3-Traps 215 }
	dataBackupFail216 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"There is another backup task running."
		::= { NAS3-Traps 216 }
	dataBackupFail217 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No distinguishable RDX device and file system found."
		::= { NAS3-Traps 217 }
	dataBackupFail218 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"device is locked."
		::= { NAS3-Traps 218 }
	dataBackupFail219 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Fail to format EXT3 file system."
		::= { NAS3-Traps 219 }
	dataBackupFail220 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Fail to format EXT4 file system."
		::= { NAS3-Traps 220 }
	dataBackupFail221 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Fail to format NTFS file system."
		::= { NAS3-Traps 221 }
	dataBackupFail222 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Fail to format HFS+ file system."
		::= { NAS3-Traps 222 }
	dataBackupFail223 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No device found."
		::= { NAS3-Traps 223 }
	dataBackupFail224 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No device found."
		::= { NAS3-Traps 224 }
	dataBackupFail252 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"iSCSI volume not found."
		::= { NAS3-Traps 252 }
	dataBackupFail253 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Backup stopped."
		::= { NAS3-Traps 253 }
	dataRestore254 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Backup started."
		::= { NAS3-Traps 254 }
	dataBackupFail255 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Backup session ready to complete. Please insert RDX-Media No.1 to complete Backup-Log."
		::= { NAS3-Traps 255 }
-- dataRestore 225
	dataRestore225 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No space left on device."
		::= { NAS3-Traps 225 }
	dataRestore226 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Not found in archive."
		::= { NAS3-Traps 226 }
	dataRestore227 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No such file or directory."
		::= { NAS3-Traps 227 }
	dataRestore228 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Unknown error."
		::= { NAS3-Traps 228 }
	dataRestore229 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Permission denied."
		::= { NAS3-Traps 229 }
	dataRestore230 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No such device or address."
		::= { NAS3-Traps 230 }
	dataRestore231 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No route to host."
		::= { NAS3-Traps 231 }
	dataRestore232 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Input/output error."
		::= { NAS3-Traps 232 }
	dataRestore233 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Invalid argument."
		::= { NAS3-Traps 233 }
	dataRestore234 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Connection refused."
		::= { NAS3-Traps 234 }
	dataRestore235 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Bad file descriptor."
		::= { NAS3-Traps 235 }
	dataRestore236 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No iSCSI device found."
		::= { NAS3-Traps 236 }
	dataRestore237 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"No USB device found."
		::= { NAS3-Traps 237 }
	dataRestore238 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Failed to restore. Device is busy."
		::= { NAS3-Traps 238 }
	dataRestore246 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Restore completed."
		::= { NAS3-Traps 246 }
	dataRestore247 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"no iSCSI device found."
		::= { NAS3-Traps 247 }
	dataRestore248 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"no USB device found."
		::= { NAS3-Traps 248 }
	dataRestore249 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"no RDX device found."
		::= { NAS3-Traps 249 }
	dataRestore250 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Device is busy when restoring."
		::= { NAS3-Traps 250 }
	dataRestore251 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"File is continued from another volume."
		::= { NAS3-Traps 251 }
	dataRestore254 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Restore is stopped."
		::= { NAS3-Traps 254 }
-- RDX change disk 239
	rdxSpanDisk239 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"the inserted RDX disk is not writeable."
		::= { NAS3-Traps 239 }
	rdxSpanDisk240 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Start to format RDX disk."
		::= { NAS3-Traps 240 }
	rdxSpanDisk241 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"RDX disk has no enough space."
		::= { NAS3-Traps 241 }
	rdxSpanDisk242 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Restore file is not on the RDX disk."
		::= { NAS3-Traps 242 }
	rdxSpanDisk243 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Wrong RDX Disk."
		::= { NAS3-Traps 243 }
	rdxSpanDisk244 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Waiting for a RDX disk inserted."
		::= { NAS3-Traps 244 }
	rdxSpanDisk245 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"System detect a RDX disk has inserted."
		::= { NAS3-Traps 245 }

-- Service 256	
	webServiceStopped NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"NAS3 Web service stopped."
		::= { NAS3-Traps 256 }
-- WORKS 257
	WORKS257 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"WORKS is executed successfully"
		::= { NAS3-Traps 257 }
	WORKS258 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"WORKS licence expired"
		::= { NAS3-Traps 258 }
	WORKS259 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"WORKS licence unregistered"
		::= { NAS3-Traps 259 }
	WORKS260 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"WORKS: No space left on device."
		::= { NAS3-Traps 260 }
	WORKS261 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"WORKS: Configuration file not found."
		::= { NAS3-Traps 261 }
	WORKS262 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"WORKS: Failed to create SSH configuration file."
		::= { NAS3-Traps 262 }
	WORKS263 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"WORKS: No certificate found."
		::= { NAS3-Traps 263 }
-- Remove backup records 264	
	RemoveBackupRecordDataBackup NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"DataBackup: Backup records removed."
		::= { NAS3-Traps 264 }
	RemoveBackupRecordDataCopy NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"DataCopy: Backup records removed."
		::= { NAS3-Traps 265 }
	RemoveBackupRecordRsync NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Rsync: Backup records removed."
		::= { NAS3-Traps 266 }
-- rsnapshot 267
	rsnapshot267 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Failed to execute snapshot. Source backup point cannot be empty."
		::= { NAS3-Traps 267 }
-- Backup 268
	dataBackupStart NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Backup started."
		::= { NAS3-Traps 268 }
-- ShareCopy Backup 269
	ShareCopyBackupStart NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"ShareCopy backup started."
		::= { NAS3-Traps 269 }
-- Rsync Backup 270
	RsyncBackupStart NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Rsync backup started."
		::= { NAS3-Traps 270 }
-- Restore Backup 271
	RestoreBackupStart NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Restore backup started."
		::= { NAS3-Traps 271 }
-- Restore Backup 272
	RestoreBackup272 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"First RDX cartridge volume not found."
		::= { NAS3-Traps 272 }
-- Backup 273
	BackupDesignation273 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Please insert the correct cartridge into the designated device.  This plan uses a designated RDX device."
		::= { NAS3-Traps 273 }
-- Backup 274
	BackupFirstDesignatedRDX274 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Please insert the first RDX cartridge into the designated device to save the backup log. This plan uses a designated RDX device."
		::= { NAS3-Traps 274 }
	rdxSpanDisk275 NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Initial log file is not on the RDX disk."
		::= { NAS3-Traps 275 }
-- Remove schedule records 276	
	RemoveScheduleRecordDataBackup NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"DataBackup: Schedule records removed."
		::= { NAS3-Traps 276 }
	RemoveScheduleRecordDataCopy NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"DataCopy: Schedule records removed."
		::= { NAS3-Traps 277 }
	RemoveScheduleRecordRsync NOTIFICATION-TYPE
		STATUS	current
		ENTERPRISE NAS3-Traps
		DESCRIPTION 
			"Rsync: Schedule records removed."
		::= { NAS3-Traps 278 }
END