Firmware Release History

 

Model: EPICA PSUN Series (80331-500)

 

 

Version

Firmware Date (YYYY/MM/DD)

Release Date (MM/DD/YYYY)

Notes

1.30

2009/06/08

06/12/2009

No longer work with proRAIDMgr.

1.      Added Flex GUI support.

2.      Added SMART info support.

3.      Added SATA spin up delay setting.

4.      Added task priority info in the array status menu.

5.      Fixed system hangs after set Ethernet configuration.

6.      Fixed R6 rebuild stop in 0%.

7.      Fixed DVR (DX-TL2500) can't detect the volume.

1.23

2009/04/16

04/24/2009

Work with proRAIDMgr v1.3.4

1.      Fixed SMTP can not work with Exchange Server.

2.      Fixed mute button function.

3.      Fixed volume size issue when delete volume and create again with same size.

1.22

2009/02/06

02/13/2009

Work with proRAIDMgr v1.3.4

1.      Added initialize task priority option in LCD for create array.

2.      Fixed LCD menu garbage code in the System configuration.

3.      Fixed setting Multiple ID issue.

4.      Fixed buzzer one shot voice not correct for raid progress.

5.      Fixed Hitachi DDT721010SLA360 detects issue.

6.      Fixed sometimes system hang up during boot process.

1.21

2008/12/05

12/08/2008

Work with proRAIDMgr v1.3.4

1.      Added priority control for raid init.

2.      Fixed Linux cannot boot on 160MB/s.

3.      Fixed video capture card disable wide mode issue.

1.2

2008/10/14

10/17/2008

Work with proRAIDMgr v1.3.4

1.      Added support three fans.

2.      Added hot spare feature.

3.      Fixed LCD module unstable problem.

4.      Fixed Over 2TiB problem on RedHat.

5.      Fixed system cannot boot after upgrading the firmware.

6.      Fixed Seagate ST3250620NS compatibility issue.

7.      Fixed fan speed is too high at startup stage.

8.      Fixed over 2 volumes on Sanyo DVR.

9.      Improved background initialization and rebuilding speed.

10. Add UUID of volumes so that OS won't be confused with old volumes.

11. Resuming progress of raid tasks even after a power surge.

1.12

2008/05/09

05/09/2008

Work with proRAIDMgr v1.3.3

1.      Added system information display in LCD.

2.      Added repeated key press detection for

3.      LCD panel.

4.      Added the support four FANs.

5.      Added RAID level checking on LCD panel.

6.      Fixed FAN failure detection.

7.      Fixed Solaris detection issue.

8.      Improved the compatibility to Adaptec.

9.      Improved the bad sector handling for SCSI-SATA.

10. Improved the consistency of LED during SCSI-SATA booting.

11. Fixed the size of a volume become zero after any change to it.

12. Fixed Linux fail to boot if connects dual channels.

13. Fixed PSU failure detection.

14. Fixed foreground init array may impact other array's activities on SCSI-SCSI.

1.1

2008/0324

03/26/2008

Work with proRAIDMgr v1.3.3

1.      Added RAID level 6 supports.

1.03

2008/02/26

02/29/2008

Work with proRAIDMgr v1.3.1

1.      Support EP-3166-SS/SA3.

2.      Support EP-2806-SA3.

3.      Fixed UPS alarm issue.

1.02

2007/12/02

12/14/2007

Work with proRAIDMgr v1.3.1

1.      Support EP-2126-SA3.

2.      Support staggers spin up of hard drives.

3.      Fixed the SES information.

4.      Fixed the LED display in the LCD panel.

5.      Fixed some event may not display again after restart.

6.      Improved the LCD panel use cases.

7.      Improved the rebuild speed.

1.0

2007/07/31

08/29/2007

Work with proRAIDMgr v1.3.1

1.      Initial release.