Firmware Release History

 

Model: U160 to U160 Active-Active Redundant (80303)(9910D)

 

 

Version

Firmware Date

Release Date

Notes

1.20

02/10/2006

02/17/2006

1.      Fixed the "Cmp cmd" selection bar position issue.

2.      Remove the "Termination" information display of host channels.

3.      Always use 115200 baud-rate for the MODEM port.

4.      Fixed "Disk timeout" setting cannot be saved problem.

5.      Fixed statistics and LCD messages inconsistency over two controllers.

1.19

06/28/2005

NA

1.      Fixed rebuild hanging problem during hot-spare disk.

2.      Fixed rebuild hanging problem during fail-over.

3.      Support new flash type SST39SF040 and AMIC29040A.

4.      Fixed host problem on FreeBSD4.1.

5.      Fixed disk not found problem when speed sets to Ultra2 and lower.

1.18

09/16/2004

01/13/2005

1.      Support over 2TB per Array.

2.      Each Controller will do its own init array while in active-active mode (but no sync progress).

3.      Support dual SAFTE-ID (6&8).

4.      Fix panel blocked problem.

5.      Fix LSI U320 HBA issue.

6.      Fix SAFTE-ID 8 problem.

7.      Fix Ultra320 HBA compatibility.

8.      Fix the GUI issue.

9.      Auto mapping other slice to LUN when raid capacity is over 2TB in Quick Setup.

10. Improve write performance for active-active mode.

11. Patch expand algorithm, no need to restart slave when expand done.

12. Force drive remaps first policy.

1.14

NA

08/05/2003

1.      Fixed Red Hat makes filesystem issue when capacity over 800GB.

2.      Fixed false "master scsi timeout" when using multiple-ID.

3.      Command queue depth: 512.

1.11

02/11/2003

02/20/2003

1.          Fixed Linux RedHat 7.x fail-over issue.

2.          Fixed HDD select timeout issue.

3.          Add "Target Reset" item in special menu (No need to restart the system)

4.          Add "Disk TimeOut" item in special menu (Need to restart the system to make it applied)

1.05a

NA

02/01/2002

1.      Initial release.