Home > Product > By Category > RAID > SB-3163E-F4A3
Simbolo Series SB-3163E-F4A3
3U/16 bays, 4Gb FC-SATA II RAID Subsystem
Features
※ Supports hot spare and automatic hot rebuild
※ Allows online capacity expansion within the enclosure
※ Local audible event notification alarm
※ Supports password protection and UPS connection
※ Built-in serial port interface for remote event notification
※ Dual host channels support clustering technology
※ Tagged command queuing for 256 commands, allows for      overlapping data streams
※ Transparent data protection for all popular operating systems
※ RAID ADG provides the highest level of data protection
※ Supports multiple array enclosures per host connection
※ Instant availability and background initialization
※ Supports greater than 2TB per volume set (64-bit LBA support)
※ Supports 4K bytes/sector for Windows up to 16TB per volume set
※ Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable      drives
※ Supports online Array roaming
※ Online RAID level/stripe size migration
※ Online capacity expansion and RAID level migration      simultaneously
※ Online Volume Set Expansion


       
see larger images and other views
 
  • Overview
  • Specifications
  • Support
  • Documents
  • Awards & MediaReview

Unparalleled Performance
‧Dual high-speed 133MHz/64bit PCI-X bus for high data throughput need.
‧The overall performance can support up to two 4Gb Fibre host channels without bandwidth bottleneck.

Extraordinary fault tolerance
‧Advanced Data Guarding technology (RAID ADG) provides the highest level of data protection.
‧RAID ADG can tolerate two simultaneous drive failures without downtime or data loss.

Exceptional Manageability
‧The firmware-embedded Web Browser-based RAID manager allows local or remote management
    and configuration.
‧The firmware-embedded SMTP manager monitors all system events and user notification automatically.
‧The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required.
‧Menu-driven front panel display.
‧Innovative Modular architecture.

Model
SB-3163E-F4A3
Form-factor
3U 19-inch rackmount chassis
RAID processor
PowerPC 440SP
RAID level
0, 1, 3, 5, 0+1, 6, JBOD
Cache memory
512MB ~ 4G
No. of channels (host+drive)
2 + 16
Host bus interface
FC-AL (4 Gb/s)
Drive bus interface
SATA II
Data transfer rate
Up to 400MB/Sec
Hot-swap drive trays
Sixteen (16) 1-inch trays
Online capacity expansion,RAID
level /stripe size migration
Yes
Online Volume sets expansion
Yes
Online Array roaming
Yes
Online consistency check
Yes
SMTP manager and
SNMP agent
Yes
E-mail Notification
Yes
Redundant Flash image
Yes
R-Link support
Yes
Support over 2TB per volume
Yes
Instant availability and background initialization
Yes
S.M.A.R.T. support
Yes
New disk insertion /
removal detection
Yes
Failed drive auto rebuild
Yes
Continuous rebuild
Yes
Multiple RAID selection
Yes
Bad block auto-remapping
Yes
Audial alarm
Yes
Password protection
Yes
UPS connection
Yes
Hot-swap power supplies
Two(2) 460W power supplies w/PFC
Cooling fans
4
Battery backup
Option
Power requirements
AC 90V ~ 264V Full Range, 8A ~ 4A, 47Hz ~ 63Hz
 
Environmental
 
Relative Humidity
10% ~ 85% Non-condensing
Operating Temp
10°C ~ 40°C (50°F ~ 104°F)
Physical Dimensions
133(H)x482(W)x600(D)mm ; 5.24(H)x18.98(W)x23.62(D)inches
Weight
24.7kgs / 54.34Lbs (without drives)
   

For FC(Fibre) firmware, please contact your account manager !!

[1.40MB]
[3.57MB]
Award & MediaReview content



 
 
 
UNIFOSA CORP. TEL:+886-2-2914-8001    FAX:+886-2-2914-7975
Copyright © 2016 UNIFOSA CORP. All rights reserved. This site is best viewed in 1024 x 768 true color with IE7.0+ or Firefox 3.0+