Firmware Release History
Model: U320 SCSI to SATA-II 12 CHL. (i80321) (6330_4)(4FANS)
|
Version |
Boot Code |
Release Date (MM/DD/YYYY) |
Notes |
|
1.46-090203 |
1.46-090106 |
03/13/2009 |
1. Added display of IU status. 2. Fixed NTP error after 2009. 3. Fixed Solaris 10 inquiry page 0x83 issue. 4. Fixed Solaris LBA overflow issue. 5. Fixed ATTO U320 SCSI issue. 6. Improved SNMP agent request overflow issue. 7. Exclude super password via TELNET for security reason. 8. Modified the LOGIN event from ERROR to WARNING. |
|
1.45-080410 |
1.45-080314 |
05/21/2008 |
1. Added MAC over Two TB for SCSI model. 2. Added MAID function. (Spin Down Idle HDD). 3. Added Off-Line RaidSet for on-line roam member disks to another subsystem. 4. Added auto hot spare support (across power cycle). 5. Added support MTRON SSD. 6. Fixed Seagate 750G/500G SATA disk timeout issue. 7. Fixed U320 SCSI bus power cycle bus reset issue. 8. Fixed for SANYO DVR. 9. Fixed WD 1TB drive detection issue. 10. Fixed IE7 update firmware problem under Vista. 11. Fixed U320 SCSI separate in-band device, API cannot detect. 12. Fixed to avoid ‘CHECK CONDITION’. 13. Fixed RAID level 1 and 0+1 issue. 14. Modify command length to fix Adaptec U320 card dump issue in Linux. |
|
1.42-070103 |
1.42-070103 |
01/10/2007 |
1. Added new LSI chip support (A3). 2. Added HDD timeout option (12, 17, 22, 27 and 32). 3. Change bad block generation to compatible with Seagate. 4. Change the Voltage high limit to 5.4V for 5V. |
|
1.41-060713 |
1.41-060713 |
07/24/2006 |
1. Initial release. |