Firmware Release History

 

Model: U320 SCSI to S-ATA-II 12 CHL. (i80321) (6330)

 

 

Version

Boot Code

Release Date (MM/DD/YYYY)

Notes

1.46-090106

1.46-090106

03/06/2009

Update from 1.36 and earlier, Ethernet configuration must be saved again.

1.      Added display of IU status.

2.      Fixed NTP error after 2009.

3.      Fixed Solaris 10 inquiry page 0x83 issue.

4.      Fixed Solaris LBA overflow issue.

5.      Fixed ATTO U320 SCSI issue.

6.      Improved SNMP agent request overflow issue.

7.      Exclude super password via TELNET for security reason.

8.      Modified the LOGIN event from ERROR to WARNING.

1.45-080314

1.45-080314

04/25/2008

Update from 1.36 and earlier, Ethernet configuration must be saved again.

1.      Fixed RAID level 1 and 0+1 issue.

1.42-061103

1.42-061013

12/04/2006

Update from 1.36 and earlier, Ethernet configuration must be saved again.

1.      Added multiple volume check at one time (HTTP only).

2.      Added SCRUB bad block and REPAIR parity function.

3.      Added Event and warning if incomplete RAID Set discovered.

4.      Added completion aborted and stopped events for migration, rebuilding and initialization.

5.      New rescue mode.

6.      Added new LSI chip support (A3).

7.      Added HDD timeout option (12, 17, 22, 27 and 32).

8.      Fixed Hitachi HD issue (Raid locked up).

9.      Fixed WD4000YR detect problem (power on/off).

10. Fixed heavy loading filter HDD temperature issue.

11. The LBA address is logged for reference when Power loss during migration, rebuilding and initialization.

12. Change bad block generation to compatible with Seagate.

13. Change the Voltage high limit to 5.4V for 5V.

1.39-060308

1.39-051206

03/20/2006

Update from 1.36 and earlier, Ethernet configuration must be saved again.

1.      Added Stagger power on control function.

2.      Added RAID 1(1+0) with initialization function.

3.      Added “2 TB CDB Selection”. For 16 bytes CDB just support LSI U320 SCSI interface.

4.      Fixed Ethernet problem (Browser and Telnet can not connect).

5.      Fixed FAN failed and recovered issue.

6.      Display SMART status in drive status.

7.      Mail SMTP port settable.

1.38-051004

1.37-050902

10/26/2005

Update from 1.36 and earlier, Ethernet configuration must be saved again.

1.      Add Http and Telnet disable function.

2.      Add NTP function support.

3.      Add unit serial number.

4.      Add TLER, timeout, retry, and buffer threshold function for SATA controller.

5.      Add In-band SCSI Function.

6.      Add Pre-read function.

7.      Fixed 53C1030 channel B issue.

8.      Fixed Marvell 6081 chip issue.

Log-in record in the event log (http / telnet / serial).

1.36-050428

1.35-050303

05/13/2005

1.      Support NCQ for SATA-II, (NCQ: 32 command).

2.      Add 5 seconds delay for battery backup support.

3.      Support 16/12 bytes CDB and Windows large block.

4.      TCP/IP timeout change to 3 minutes.

5.      Send RST to client if TCP connection over 3 minutes.

6.      Fixed disk geometry of mode sense parameter for Solaris.

7.      Fixed U320 MPT issue on Solaris.

8.      Use NEW_SMART function for disks.

9.      Improve random access performance.

10. SNMP parameter can be modify for, sysContact.0, sysLocation.0 and sysName.0

1.33-040923

1.33-040923

09/24/2004

1.      Support BBM.

2.      New boot code module.

3.      Fixed SUN SPARC on-board U160 issue.

4.      Fixed RAID 5 with 2 disks fail issue.

1.33-040729

NA

07/30/2004

1.      Initial release.