|
 Inquiry |
 |
DP-503UA/WA
Data Sheet |
Manual
5 bays, SATA, USB 2.0 / SATA,
FireWire 800 to SATA II
Tower RAID Subsystem
Features
-
SATA, USB 2.0 / SATA,
FireWire 800 host interface
- Supports hot spare and automatic hot rebuild
- Allows online capacity expansion within the enclosure
- Local audible event notification alarm
- Supports password protection
- Built-in serial port interface for remote event notification
- Tagged command queuing for 256 commands, allows for
overlapping data
streams
- Transparent data protection for all popular operating systems
RAID Management
- Smart-function LCD panel
- Environmental monitoring unit
- Real time drive activity and status indicators
- Web-based GUI management utility
Specification
|
Model |
DP-503UA/WA |
|
Form-factor |
Tower |
|
RAID processor |
Intel 80219 64 bit RISC |
|
RAID Level |
0, 1, 0+1, 3, 5,6 and JBOD |
|
Cache memory |
256MB |
|
No. of channels (host+drive) |
2 + 5 / 3 + 5 |
|
Host bus interface |
SATA, USB 2.0 /
SATA, FireWire 800 (1394b) |
|
Drive bus interface |
SATA II (3Gb/s, NCQ) |
|
Data transfer rate |
Up to 150MB, 480Mb/150MB, 800Mb |
|
Back plane board |
SATA II |
|
Hot-swap drive trays |
Five (5) 1-inch trays |
|
Cooling fans |
2 |
|
Host Independent |
Yes |
|
Environment monitor |
Yes |
|
Online expansion |
Yes |
|
Continuous rebuild |
Yes |
|
Auto rebuild |
Yes |
|
Password protection |
Yes |
|
Audible alarm |
Yes |
|
Failed drive indicators |
Yes |
|
Online consistency check |
Yes |
|
Bad block auto-remapping |
Yes |
|
Multiple RAID selection |
Yes |
|
Array roaming |
Yes |
|
Online RAID level migration |
Yes |
|
Variable stripe size |
Yes |
|
Power supply |
270W w/PFC |
|
Power requirements |
AC 100V ~ 240V Full range
7A ~ 4A, 60Hz ~ 50Hz
|
|
Environmental |
|
|
Relative Humidity: |
10% ~ 85% Non-condensing |
|
Operating Temp: |
10°C ~ 40°C (50°F
~ 104°F) |
|
Physical Dimensions: |
261(H) x 180(W) x 390(D)mm
|
|
Weight |
9.0kg / 19.8lbs (without drives) |
|
|
