|
SB-3163S-F4A3
Data Sheet |
Manual
3U/16 bays, 4Gb/s Fibre to SATA II
RAID 6 subsystem
Features
-
Supports RAID levels 0, 1, 0+1, 3,
5, 6 and JBOD
- Supports hot spare and automatic hot
rebuild
- Allows online capacity expansion within the enclosure
- Local audible event notification alarm
- Supports password protection and UPS connection
- Built-in serial port interface / or Ethernet for remote
event
notification
- Dual host channels support clustering technology
- Tagged command queuing for 256 commands, allows for
overlapping data streams
- Transparent data protection for all popular operating
systems
- RAID ADG provides the
highest level of data protection
- Supports multiple array
enclosures per host connection
- Instant availability and background initialization
- Supports greater than 2TB
per volume set (64-bit LBA support)
- Supports 4K bytes/sector for Windows up to 16TB per volume set
- Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable
drives
- Supports online Array roaming
- Online RAID level/stripe size migration
- Online capacity expansion and RAID level migration simultaneously
- Online Volume Set Expansion
Exceptional Manageability
- The firmware-embedded Web Browser-based RAID manager
allows local or
remote management and configuration
- The firmware-embedded SMTP manager monitors all system
events and user
notification automatically
- The firmware-embedded SNMP agent allows remote to monitor
events via LAN
with no SNMP agent required
- Menu-driven front panel display
- Innovative Modular architecture
RAID Function
- New disk auto spare
- Host independent
- Environment monitor
- Online expansion
- Continuous rebuild
- Online consistency check
- Failed drive auto rebuild
- Failed drive indicators
- Audible alarm
- Password protection
- E-mail notification
- UPS connection
- Bad block auto-remapping
- Array Roaming
- SNMP Protocol Support
- Multiple RAID selection
- Online RAID level
migration
- Background RAID
initialization
- S.M.A.R.T.
Specification
|
Model |
SB-3163S-F4A3 |
|
Form-factor |
3U 19-inch rackmount
chassis |
|
RAID processor |
PowerPC 440SP |
|
RAID Level |
0,1,3,5,0+1,6,JBOD |
|
Cache memory |
256MB ~ 4G |
|
No. of channels (host+drive) |
2 + 16 |
|
Host bus interface |
FC-AL (4 Gb/s) |
|
Drive bus interface |
SATA II |
|
Data transfer rate |
Up to 400MB/Sec |
|
Back plane board |
SATA II |
|
Hot-swap drive trays |
Sixteen (16) 1-inch
trays |
|
Hot-swap power supplies |
Two (2) 460W power supplies
w/PFC
|
|
Cooling fans |
4 |
|
Battery backup |
Option |
|
Power requirements |
AC 90V ~ 264V Full Range
8A ~ 4A, 47Hz ~63Hz |
|
Environmental |
|
|
Relative Humidity: |
10% ~ 85% Non-condensing |
|
Operating Temp: |
10°C ~ 40°C (50°F
~ 104°F) |
|
Physical Dimensions: |
133(H) x 482(W) x 600(D)mm
5.24(H) x 18.98(W) x
23.62(D)inches |
| Weight |
20.5kgs / 45.1Lbs (without drives) |
|
