Home

Products Support Company Site Map

 

   

Products

Inquiry

 

  SB-2123-F4S3  Data Sheet | Manual

  2U/12 bays, 4Gb Fibre-SAS / SATA II RAID subsystem

  Features
  -
Supports RAID levels 0, 1, 3, 5, 6, 30, 50, 60 and JBOD

  - Supports online Array roaming

  - Online RAID level/stripe size migration

  - Online capacity expansion and RAID level migration  

    simultaneously

  - Online Volume Set Expansion

  - Supports multiple array enclosures per host connection

  - Supports greater than 2TB per volume set (64-bit LBA support)

  - Supports 4K bytes/sector for Windows up to 16TB per volume set

  - Support spin down drives when not in use to extend service

    (MAID)

  - Transparent data protection for all popular operating systems

  - RAID ADG provides the highest level of data protection

  - Instant availability and background initialization

  - Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable

    drives

  - Supports hot spare and automatic hot rebuild

  - Local audible event notification alarm

  - Supports password protection and UPS connection

  - Built-in serial port interface for remote event notification

  - Redundant flash image for high availability

   

  Specification

              

  Model   SB-2123-F4S3
  Form-factor   2U 19-inch rackmount chassis
  RAID Controller   Intel IOP341 64-bit
  RAID level   0, 1, 3, 5, 6, 0+1, 30, 50, 60, JBOD
  Cache memory   512MB ~ 2GB DDR2 SDRAM

  Host bus interface

  FC-AL (4 Gb/s) per port

  Drive bus interface

  SAS or 3Gb/s SATA II

  Data transfer rate

  Up to 400MB/sec per channel

  Expansion

  One 4x mini SAS (SFF -8088)

  Hot-swap drive trays

  Twelve (12) 1-inch trays

  Online capacity expansion,

  RAID level / stripe size

  migration

  Yes

  Online Volume sets

  expansion

  Yes

  Online Array roaming

  Yes

  Online consistency check

  Yes

  SMTP manager and SNMP

  agent

  Yes

  E-mail Notification

  Yes

  Redundant Flash image

  Yes

  R-Link support

  Yes

  Support over 2TB per 

  volume

  Yes

  Instant availability and
  background initialization

  Yes

  S.M.A.R.T. support

  Yes

  New disk insertion /

  removal detection

  Yes

  Failed drive auto rebuild

  Yes

  Continuous rebuild

  Yes

  Multiple RAID selection

  Yes

  Bad block auto-remapping

  Yes

  Audial alarm

  Yes

  Password protection

  Yes

  UPS connection

  Yes

  SES2 enclosure  

  management

  Yes

  Hot-swap power supplies

  Yes

  Cooling fans

  Two(2) 350W power supplies w/PFC

  Battery backup

  2

  Power requirements

  Option

  Environmental

  AC 90V ~ 264V Full Range
  8A ~ 4A, 47Hz ~ 63Hz

  Relative Humidity

  10% ~ 85% Non-condensing

  Operating Temp

  10oC ~ 40oC (50oF ~ 104oF)

  Physical Dimension

  88(H)x482(W)x650(D)mm

  Weight (Without Disk)

  13.5kgs/29.7Lb

 
 

 

 

     Your Location:  

     Products >>

     SAS RAID

     SB-2123-F4S3

 
 
 

 

 

 

  Copyright © 2005 Proware Technology Corp.  All rights reserved.