Home > Product > By Category > RAID > SB-3163-S3A3
Simbolo Series SB-3163-S3A3
3U/16 bays, 3Gb SAS-SATA II RAID Subsystem
Features
※ Supports hot spare and automatic hot rebuild
※ Allows online capacity expansion within the enclosure.
※ Local audible event notification alarm. 
※ Supports password protection and UPS connection.
※ Built-in serial port interface for remote event notification.
※ Dual host channels support clustering technology.
※ Tagged command queuing for 256 commands, allows for      overlapping data streams.
※ Transparent data protection for all popular operating systems.
※ RAID ADG provides the highest level of data protection.
※ RAID ADG can tolerate multiple simultaneous drive failures
     without downtime or data loss.
※ Supports multiple array enclosures per host connection.
※ Online RAID level migration.

 
       
see larger images and other views
 
  • Overview
  • Specifications
  • Support
  • Documents
  • Awards & MediaReview

SHighest Density Available
‧3U chassis with 16 bays carriers.
‧Over 4 Terabytes per chassis.

Extraordinary fault tolerance
‧Advanced Data Guarding technology (RAID ADG) provides the highest level of data protection.
‧RAID ADG can tolerate multiple simultaneous drive failures without downtime or data loss.

Unparalleled Aluminum material
‧Aluminum is an Excellent Thermal Conductor.
‧Aluminum Exhibits HighStrength-to-Weight Ratio.

Extraordinary performance
‧Serial ATA II: The Next Generation Internal Storage Interconnect.
‧Better connectivity, higher data transfer rates.


Model
 SB-3163-S3A3
Form-factor
 3U 19-inch rackmount chassis
RAID processor
 Intel 80321 64 bit RISC
RAID level
 0, 1, 0+1, 3, 5 , 6, JBOD
Cache memory
 256MB ~ 1024MB
Host bus interface
 Two 4x mini SAS (3Gb/s)
Drive bus interface
 SATA II
Data transfer rate
 Up to 300MB/Sec per channel
Back plane board
SATA II
Hot-swap drive trays
 Sixteen (16) 1-inch trays
Hot-swappable power supplies
Three (3) 300W power supplies w / PFC
Cooling fans
 2 (blower)
Battery backup
 Option
R-Link support
 Yes
SNMP Protocol Support
 Yes
Background RAID Initialization
 Yes
S.M.A.R.T
 Yes
Online capacity expansion, RAID level / stripe size migration
 Yes
Redundant Flash image
 Yes
Bad block auto-remapping
 Yes
Array roaming
 Yes
Power requirements
 AC 90V ~ 254V Full Range, 12A / 6A at 110V / 220V, 50Hz/60Hz
 
Environmental
  
Relative Humidity
 10% ~ 85% Non-condensing
Operating Temp
 10°C ~ 40°C (50°F ~ 104°F)
Physical Dimensions
 133(H) x 482(W) x 609(D) mm ; 5.24(H) x 18.98(W) x 23.98(D) inches
Weight
 20.5kgs / 45.1Lbs (without drives)
   

[448KB]
[11.1KB]

[1.27MB]
[1.73MB]
Award & MediaReview content
 
 
 
Proware Technology Corp. TEL：+886-2-2914-8001    FAX：+886-2-2914-7975
Copyright © 2012 Proware Technology Corp. All rights reserved. This site is best viewed in 1024 x 768 true color with IE7.0+ or Firefox 3.0+