Highest Density Available
‧2U chassis with 8 bays carriers.
‧Over 2 Terabytes per chassis.
Extraordinary performance
‧Serial ATA II: The Next Generation Internal Storage Interconnect.
‧Better connectivity, higher data transfer rates.
‧Advanced Data Guarding technology (RAID ADG) provides the highest level of data protection.
‧RAID ADG can tolerate multiple simultaneous drive failures without downtime or data loss.
Exceptional Manageability
‧GUI for remote management and configuration.
‧Menu-driven front panel display.
Unsurpassed value
‧RAID ADG offers lower implementation costs and greater usable capacity per U than RAID 1.
Model |
SB-2803-F4A3 |
Form-factor |
2U 19-inch rackmount chassis |
RAID processor |
Intel 80321 64 bit RISC |
RAID level |
0, 1, 0+1, 3, 5 , 6, JBOD |
Cache memory |
128MB ~ 1024MB |
No. of channels (host + drive) |
2 + 8 |
Host bus interface |
FC-AL x 2 (4Gb/s) |
Drive bus interface |
SATA II |
Data transfer rate |
Up to 400MB/Sec |
Back plane board |
SATA II |
Hot-swap drive trays |
Eight (8) 1-inch trays |
Hot-swappable power supplies |
300W x 2 power supplies w / PFC |
Cooling fans |
2 |
Battery backup |
Option |
R-Link support |
Yes |
SNMP Protocol Support |
Yes |
Array roaming |
Yes |
Power requirements |
AC 95V ~ 264V Full Range, 6A / 3A at 115V / 230V, 47Hz ~ 63Hz |
|
|
Environmental
|
|
Relative Humidity
|
10% ~ 85% Non-condensing |
Operating Temp |
10°C ~ 40°C (50°F ~ 104°F) |
Physical Dimensions |
88(H) x 482(W) x 650(D) mm ; 3.46(H) x 18.98(W) x 25.59(D) inches |
Weight |
13.5kgs / 29.7Lbs (without drives) |
| |
|
For FC(Fibre) firmware,
please contact your account manager !!
Award & MediaReview content
