Home > Product > By Category > JBOD > EP-1403-S3A3
EPICa Series EP-1403-S3A3
1U 4bays, SAS - SATAII RAID Subsystem
Features
※ Supports RAID levels 0 , 1 , 10(1E) , 3 , 5 , 6 and JBOD
※ Supports online array roaming
※ Online RAID level/stripe size migration
※ Online capacity expansion and RAID level migration simultaneously
※ Online volume set expansion
※ Supports multiple array enclosures per host connection
※ Supports greater than 2TB per volume set
※ Transparent data protection for all popular operating systems
※ RAID ADG provides the highest level of data protection
※ Instant availability and background initialization
※ Supports S.M.A.R.T, NCQ and OOB staggered Spin-up capable drives
※ Local audible event notification alarm
※ Supports password protection
※ Redundant flash image for high availability
※ Support spin down drives when not in use to extend service (MAID)
※ Supports bad blocks auto remapping and schedule volume check
※ Supports hot spare and automatic hot rebuild

       
see larger images and other views
 
  • Overview
  • Specifications
  • Support
  • Documents
  • Awards & MediaReview

The Most cost-effective SATA II RAID Subsystem, the EP-1403 Series RAID subsystem features 3Gb SAS host interface to increase system efficiency and performance. It carries 4 hot-swappable SATA II hard disk drive bays in a 19-inch 1U rackmount unit, scaling the storage capacity of server in the terabyte range, provides a fast and easy way to install and upgrade your storage.

Exceptional Manageability
- The firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration
- The firmware-embedded SMTP manager monitors all system events and user notification automatically
- The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
- Menu-driven front panel display

Model
 EP-1403-S3A3
RAID Controller
  
RAID processor
 Intel IOP348 64 bit RISC
Cache memory
 512MB ~ 4GB DDR2 ECC SDRAM
No.of channels (Host+Drive)
 2+4
Host interface
 Two 4x mini SAS(3Gb/s)
Disk interface
 SATA II
Management port support
 Yes
Monitor port support
 Yes
RAID Features
  
RAID level
 0, 1, 10(1E), 3 , 5 , 6 and JBOD
Array group
 Yes
LUNs
 Yes
Hot spare
 Yes
Drive roaming
 Yes
Online rebuild
 Yes
Variable stripe size
 Yes
E-mail notification
 Yes
Online capacity expansion,
RAID level / stripe size migration
 Yes
Online array roaming
 Yes
Online consistency check
 Yes
SMTP manager and SNMP agent
 Yes
Redundant flash image
 Yes
Instant availability and
background initialization
 Yes
S.M.A.R.T. support
 Yes
MAID
 Yes
Bad block auto-remapping
 Yes
Enclosure
  
Platform
 Rackmount
Form factor
 1U
# of hot swap trays
 4
Tray lock
 Yes
Disk status indicator
 Access / Fail LED
Power supply
 220W w/PFC
# of fans
 1
Power requirements
 AC90V ~ 264V Full range
6A ~ 3A, 47Hz ~ 63Hz
Environmental
  
Relative humidity
 10% ~ 85% Non-condensing
Operating temperature
 10°C~40°C(50°F ~ 104°F)
Specification are subject to change without notice.
All company and product names are trademarks of their respective

[584KB]
[12KB]

Manual
[928KB]
Award & MediaReview content
 
 
 
Proware Technology Corp. TEL：+886-2-2914-8001    FAX：+886-2-2914-7975
Copyright © 2012 Proware Technology Corp. All rights reserved. This site is best viewed in 1024 x 768 true color with IE7.0+ or Firefox 3.0+